Poulan Pro PR5020 chain size
The 50 cc Poulan Pro PR5020 is sold with one bar length, 20 inches, and its manual approves a single bar and chain pairing: bar 578133803 with chain 545196401. The chain is full-size 3/8-inch pitch in .050 gauge. The manual prints no drive-link count; Oregon's fit lists put the PR5020 under its 70-link loops D70 and 72LPX070G. Pages that quote 72 links are not backed by any Poulan Pro or Oregon document opened for this record: Oregon's 72-link 20-inch loops name the older PP5020AV, not the PR5020. The 72 at the front of Oregon part number 72LPX070G is the chain type, not a link count.
Poulan Pro PR5020 with the 20-inch bar it is sold with: 3/8" pitch, .050" gauge, 70 drive links.
Poulan Pro PR5020 chain size by bar length
Links marked “(paid link)” go to Amazon and earn this site a commission if you buy. As an Amazon Associate I earn from qualifying purchases. How this works
| Bar | Applies to | Pitch | Gauge | Drive links | Status |
|---|---|---|---|---|---|
| 20″ (51 cm) stock | All versions | 3/8"[1][2] | .050"[1][2][3] | 70[2] | One source |
Numbers in brackets point to the sources at the foot of the page. “Verified” means two or more separate documents agree and at least one comes from a manufacturer. “One source” means a single manufacturer document; two editions of the same manual count as one. Rows where sources disagree carry no shopping link.
Chains for each set-up
20-inch bar
3/8" pitch, .050" gauge, 70 drive links One source
| Chain | Part number | Why it is listed |
|---|---|---|
| Poulan Pro Saw chain approved in the operator's manual | 545196401[1] One source | The saw maker’s own chain |
| Poulan Pro 20 in. replacement chain | 577180501[3] One source | The saw maker’s own chain |
| Oregon 72LPX PowerCut (full chisel) | 72LPX070G[2] One source | Oregon lists it for this saw |
| Oregon D70 AdvanceCut | D70[5] One source | Oregon lists it for this saw |
Show the evidence for this row
- Pitch:
Pitch 3/8
— Husqvarna AB (Poulan Pro brand), Poulan Pro PR5020 Instruction Manual, 115817295 Rev. E (2023-08-02), Husqvarna Group document library, p. 19, Technical data, Chain/bar: Pitch - Pitch:
Pitch: 3/8", gauge: .050", drive link count: 70
— Oregon Tool, Inc., Oregon 72LPX070G PowerCut chain product page (20 in., 70 drive links) with fit list, Product details; fit list under Poulan reads '967061501, PP5020AV, PR5020' - Gauge:
Thickness of drive links 1,3 mm (.050 in)
— Husqvarna AB (Poulan Pro brand), Poulan Pro PR5020 Instruction Manual, 115817295 Rev. E (2023-08-02), Husqvarna Group document library, p. 19, Technical data, Chain/bar: Thickness of drive links - Gauge:
Fits 3/8" Pitch & .050 Gas Chainsaw.
— Husqvarna AB (Poulan Pro brand), 20 in. Chain (577180501) accessory page, Poulan Pro website copy on the www-dev host, Product description - Gauge:
Pitch: 3/8", gauge: .050", drive link count: 70
— Oregon Tool, Inc., Oregon 72LPX070G PowerCut chain product page (20 in., 70 drive links) with fit list, Product details; fit list under Poulan reads '967061501, PP5020AV, PR5020' - Drive links:
Pitch: 3/8", gauge: .050", drive link count: 70
— Oregon Tool, Inc., Oregon 72LPX070G PowerCut chain product page (20 in., 70 drive links) with fit list, Product details; fit list under Poulan reads '967061501, PP5020AV, PR5020' - Poulan Pro part number:
PR5020 578133803 20 in (50 cm) 545196401 17
— Husqvarna AB (Poulan Pro brand), Poulan Pro PR5020 Instruction Manual, 115817295 Rev. E (2023-08-02), Husqvarna Group document library, p. 19, 'Guide bar and saw chain combinations' table (columns: Model, Bar P/N, Length, Chain P/N, CKA) - Poulan Pro part number:
577180501 20″ Chain
— Husqvarna AB (Poulan Pro brand), 20 in. Chain (577180501) accessory page, Poulan Pro website copy on the www-dev host, Overview heading; the PR5020 product page links to this page under 'Related accessories' - Oregon part number:
Part# 72LPX070G
— Oregon Tool, Inc., Oregon 72LPX070G PowerCut chain product page (20 in., 70 drive links) with fit list, Part number heading; fit list under Poulan reads '967061501, PP5020AV, PR5020' - Oregon part number:
Part# D70
— Oregon Tool, Inc., Oregon D70 AdvanceCut chain product page (20 in., 70 drive links) with fit list, Part number heading; fit list under Poulan reads '967061501, PP5020AV, PR5020'
Confirm before you order
- Read the bar. Most bars have the pitch, gauge and drive-link count stamped near the mounting end. Those numbers describe the bar actually on your saw, which may not be the one it left the factory with.
- If the stamp is worn off, count the drive links on the old chain: the teeth on the inside of the loop that ride in the bar groove.
- Match all three numbers to one row of the Poulan Pro PR5020 table above. A chain with the right length but the wrong gauge or pitch will not fit the bar or the sprocket.
How to find pitch, gauge and drive links step by step
If your saw matches none of the rows, its bar or sprocket has probably been changed. Go by what is stamped on the bar, or ask a dealer.
Numbers you may see elsewhere
These figures appear on other pages for this saw. They are listed with the reason they are not used in the table above.
- 20-inch bar, drive links: 72 (sawchaincheck.vercel.app (third-party fit site))[4] — No Poulan Pro or Oregon document opened lists 72 links for the PR5020; Oregon lists it only under 70-link loops, and its 72-link 20-inch loops name the PP5020AV instead.
Where the 70 comes from, and why it is single-source
The PR5020 manual (115817295 Rev. E, dated 2023-08-02) gives the pitch as 3/8, the drive link thickness as 1,3 mm (.050 in) and the approved bar and chain by part number. It does not state how many drive links the chain has.
The count in this record comes from Oregon. Oregon's 20-inch loops D70 and 72LPX070G are both 3/8-inch pitch, .050 gauge, 70 drive links, and both name the PR5020 and the model number 967061501 in their fit lists. Those two pages carry the same fit list, so they are counted here as one source. A Poulan Pro document that states the link count would settle it.
Why some pages say 72
No Poulan Pro or Oregon document opened for this record lists a 72-link chain for the PR5020. Oregon's 72-link 20-inch loops, D72 and 72LPX072G, name the PP5020AV in their fit lists but not the PR5020.
Two things make 72 an easy number to pick up. Oregon's part numbers for this chain family begin with 72: in 72LPX070G, 72LPX is the chain type and 070 is the link count. And Oregon's own pages caution that a bar made by Oregon may take a different drive link count than another producer's bar, so a saw fitted with a non-original bar may not match the figures here. If the bar is not the original, count the drive links on the chain that fits it now.
Two Poulan Pro part numbers for the chain
The manual lists chain 545196401. Poulan Pro's accessory page for its 20-inch replacement chain, which the PR5020 product page links to under related accessories, carries the number 577180501 and says it fits 3/8" pitch, .050 gas chainsaws. No document opened for this record states how the two numbers relate, so both are listed.
Full-size 3/8, not low profile
Oregon marks low-profile chain as 3/8" Low Profile on its product pages. The loops it lists for the PR5020 are marked plain 3/8". A low-profile loop with the same link count is a different chain.
Sources
- Husqvarna AB (Poulan Pro brand). Poulan Pro PR5020 Instruction Manual, 115817295 Rev. E (2023-08-02), Husqvarna Group document library. Saw maker’s own document; retrieved November 18, 2026
- Oregon Tool, Inc. Oregon 72LPX070G PowerCut chain product page (20 in., 70 drive links) with fit list. Chain or bar maker’s fit data; retrieved November 18, 2026
- Husqvarna AB (Poulan Pro brand). 20 in. Chain (577180501) accessory page, Poulan Pro website copy on the www-dev host. Saw maker’s own document; retrieved November 18, 2026
- sawchaincheck.vercel.app (third-party fit site). Poulan Pro PR5020 Chain & Bar Guide. Other page; retrieved November 18, 2026
- Oregon Tool, Inc. Oregon D70 AdvanceCut chain product page (20 in., 70 drive links) with fit list. Chain or bar maker’s fit data; retrieved November 18, 2026
Seen a number here that does not match your saw or its manual? Report it.