Stihl MS 291 chain size

Data last verified · 17 sources · Reviewed by Phong Hao on November 18, 2026

STIHL USA lists the MS 291 with an 18-inch Light 04 bar and a 23 RM3 74 loop, or a 20-inch Light 04 bar and a 23 RM3 81 loop; both are .325-inch pitch and .050-inch gauge. STIHL's 2025 Canadian manual for the MS 271 and MS 291 specifies a 1.6 mm (.063-inch) groove and 26 RM3 chain instead, and STIHL USA lists cut kits that fit the MS 291 in both gauges at 16, 18 and 20 inches. The drive-link counts (67, 74 and 81) do not change with gauge, so a buyer has to read the groove width on the bar before choosing between the 23 and 26 loops.

Stihl MS 291, 18-inch bar, .050" (1.3 mm) bar with 23 RM3 chain: .325" pitch, .050" gauge, 74 drive links. Other versions of this saw take a different chain. Check which one you have below.

Which version do you have?

Bar groove gauge (.050" or .063") Verified

  • .050" (1.3 mm) bar with 23 RM3 chain: the loops STIHL USA names on its MS 291 page and in Cut Kits 16, 17 and 18
  • .063" (1.6 mm) bar with 26 RM3 chain: the groove width in STIHL's 2025 Canadian manual and the loops in STIHL USA's Cut Kits 4, 5 and 6

How to tell: Read the groove width marked on the guide bar tail: 1.3 mm (.050") or 1.6 mm (.063"). If a STIHL chain or its box is to hand, its marketing number says the same thing: 23 RM3 is .050" gauge, 26 RM3 is .063" gauge. Do not go by drive-link count, which is identical for both gauges on the same bar length.[1][2][3][4][5]

Stihl MS 291 chain size by bar length

Links marked “(paid link)” go to Amazon and earn this site a commission if you buy. As an Amazon Associate I earn from qualifying purchases. How this works

BarApplies toPitchGaugeDrive linksStatus
16″ (41 cm).050" (1.3 mm) bar with 23 RM3 chain.325"[4][6].050"[6]67[6][11]One source
16″ (41 cm).063" (1.6 mm) bar with 26 RM3 chain.325"[4][16][17].063"[13][17]67[16][17]Verified
18″ (46 cm) stock.050" (1.3 mm) bar with 23 RM3 chain.325"[3][4][6][7].050"[5][6][7]74[1][3][7]Verified
18″ (46 cm).063" (1.6 mm) bar with 26 RM3 chain.325"[2][4][12].063"[12][13]74[2][12]Verified
20″ (51 cm) stock.050" (1.3 mm) bar with 23 RM3 chain.325"[4][6][8][9].050"[6][9]81[1][8][9]Verified
20″ (51 cm).063" (1.6 mm) bar with 26 RM3 chain.325"[4][14][15].063"[13][15]81[14][15]Verified

Numbers in brackets point to the sources at the foot of the page. “Verified” means two or more separate documents agree and at least one comes from a manufacturer. “One source” means a single manufacturer document; two editions of the same manual count as one. Rows where sources disagree carry no shopping link.

Chains for each set-up

16-inch bar — .050" (1.3 mm) bar with 23 RM3 chain

.325" pitch, .050" gauge, 67 drive links One source

ChainPart numberWhy it is listed
Stihl 23 RM3 (semi-chisel)36950050067[6] One sourceThe saw maker’s own chain
Search for .325 .050 67 drive link chainsaw chain: Amazon.com (paid link) Amazon.ca
Show the evidence for this row
  • Pitch: Bar lengths: 40, 45, 50 cm Pitch: .325" (8.25 mm) — ANDREAS STIHL AG & Co. KG, STIHL MS 271, 291 Instruction Manual / Notice d'emploi, 0458-574-8221-D (2025, English/French, CSA Z62.3 edition), p. 42, section 35.7.1 Rollomatic E guide bars (40, 45, 50 cm are the 16, 18, 20 in. bars)
  • Pitch: RAPID™ Micro™ 3 | .325" | .050" | 67 drive links (23 RM3 67) — STIHL Inc. (STIHL USA), RAPID Micro 3 (RM3) .325 | .050" saw chain page (loop list with part numbers), loop list (page structured data), variant 23 RM3 67; the loop named with this saw on STIHL USA's pages
  • Gauge: RAPID™ Micro™ 3 | .325" | .050" | 67 drive links (23 RM3 67) — STIHL Inc. (STIHL USA), RAPID Micro 3 (RM3) .325 | .050" saw chain page (loop list with part numbers), loop list (page structured data), variant 23 RM3 67; the loop named with this saw on STIHL USA's pages
  • Drive links: Fits MS 261, MS 271, MS 291, MSA 300. Includes (1) 16” Guide Bar & (2) Loops of 16” Saw Chain (23 RM3 67). — STIHL Inc. (STIHL USA), 2+1 Cut Kit 16 - 16" Guide Bar & Saw Chains product page, Product Details
  • Drive links: RAPID™ Micro™ 3 | .325" | .050" | 67 drive links (23 RM3 67) — STIHL Inc. (STIHL USA), RAPID Micro 3 (RM3) .325 | .050" saw chain page (loop list with part numbers), loop list (page structured data), variant 23 RM3 67; confirms that the number after 23 RM3 in the kit description is the drive-link count
  • Stihl part number: "sku": "36950050067" — STIHL Inc. (STIHL USA), RAPID Micro 3 (RM3) .325 | .050" saw chain page (loop list with part numbers), loop list (page structured data), sku of the variant "23 RM3 67"; printed without spaces

16-inch bar — .063" (1.6 mm) bar with 26 RM3 chain

.325" pitch, .063" gauge, 67 drive links Verified

ChainPart numberWhy it is listed
Stihl 26 RM3 (semi-chisel)36890050067[13] One sourceThe saw maker’s own chain
Oregon 22BPX (micro chisel)22BPX067G[17] One sourceOregon lists it for this saw
Search for Oregon 22BPX067G: Amazon.com (paid link) Amazon.ca
Show the evidence for this row
  • Pitch: Bar lengths: 40, 45, 50 cm Pitch: .325" (8.25 mm) — ANDREAS STIHL AG & Co. KG, STIHL MS 271, 291 Instruction Manual / Notice d'emploi, 0458-574-8221-D (2025, English/French, CSA Z62.3 edition), p. 42, section 35.7.1 Rollomatic E guide bars (40, 45, 50 cm are the 16, 18, 20 in. bars)
  • Pitch: Includes Rollomatic E bar (16") and 2 .325” Rapid Micro 3 saw chains — STIHL Inc. (STIHL USA), 2+1 Cut Kit 4 - 16" Guide Bar & Saw Chains product page, Product Details (kit for STIHL MS 261, MS 271, MS 291, MS 300 and MSA 300)
  • Pitch: For saw sizes 38-62 cc that run .325 Inch Pitch, .063 Inch (1.6 mm) gauge, 67 drive links — Oregon Tool, Inc., Oregon 22BPX067G product page with Fit Guide (22BPX ControlCut chain, 16 in. bar, 67 drive links), product page for 22BPX067G (16 in. bar), feature list; the page's "Fit Guide" > Stihl lists MS 291
  • Gauge: RAPID™ Micro™ 3 | .325" | .063" | 67 drive links (26 RM3 67) — STIHL Inc. (STIHL USA), RAPID Micro 3 (RM3) .325" | .063" saw chain page (loop list with part numbers), loop list (page structured data), variant 26 RM3 67; the loop named in STIHL USA's cut kit for this saw
  • Gauge: For saw sizes 38-62 cc that run .325 Inch Pitch, .063 Inch (1.6 mm) gauge, 67 drive links — Oregon Tool, Inc., Oregon 22BPX067G product page with Fit Guide (22BPX ControlCut chain, 16 in. bar, 67 drive links), product page for 22BPX067G (16 in. bar), feature list; the page's "Fit Guide" > Stihl lists MS 291
  • Drive links: Fits MS 261, MS 271, MS 291. Includes (1) 16" Guide Bar & (2) Loops of 16" Saw Chain (26 RM3 67). — STIHL Inc. (STIHL USA), 2+1 Cut Kit 4 - 16" Guide Bar & Saw Chains product page, Product Details
  • Drive links: For saw sizes 38-62 cc that run .325 Inch Pitch, .063 Inch (1.6 mm) gauge, 67 drive links — Oregon Tool, Inc., Oregon 22BPX067G product page with Fit Guide (22BPX ControlCut chain, 16 in. bar, 67 drive links), product page for 22BPX067G (16 in. bar), feature list; the page's "Fit Guide" > Stihl lists MS 291
  • Stihl part number: "sku": "36890050067" — STIHL Inc. (STIHL USA), RAPID Micro 3 (RM3) .325" | .063" saw chain page (loop list with part numbers), loop list (page structured data), sku of the variant "26 RM3 67"; printed without spaces
  • Oregon part number: Part# 22BPX067G — Oregon Tool, Inc., Oregon 22BPX067G product page with Fit Guide (22BPX ControlCut chain, 16 in. bar, 67 drive links), product page heading

18-inch bar — .050" (1.3 mm) bar with 23 RM3 chain

.325" pitch, .050" gauge, 74 drive links Verified

ChainPart numberWhy it is listed
Stihl 23 RM3 (semi-chisel)36950050074[6] One sourceThe saw maker’s own chain
Oregon 20BPX (micro chisel)20BPX074G[7] One sourceOregon lists it for this saw
Search for Oregon 20BPX074G: Amazon.com (paid link) Amazon.ca
Show the evidence for this row
  • Pitch: Bar lengths: 40, 45, 50 cm Pitch: .325" (8.25 mm) — ANDREAS STIHL AG & Co. KG, STIHL MS 271, 291 Instruction Manual / Notice d'emploi, 0458-574-8221-D (2025, English/French, CSA Z62.3 edition), p. 42, section 35.7.1 Rollomatic E guide bars (40, 45, 50 cm are the 16, 18, 20 in. bars)
  • Pitch: RAPID™ Micro™ 3 | .325" | .050" | 74 drive links (23 RM3 74) — STIHL Inc. (STIHL USA), RAPID Micro 3 (RM3) .325 | .050" saw chain page (loop list with part numbers), loop list (page structured data), variant 23 RM3 74; the loop named with this saw on STIHL USA's pages
  • Pitch: Includes Light 04 bar (18") and 2 .325” Rapid Micro 3 saw chains — STIHL Inc. (STIHL USA), 2+1 Cut Kit 17 - 18" Guide Bar & Saw Chains product page, Product Details (kit for STIHL MS 261, MS 271, MS 291, MS 300 and MSA 300)
  • Pitch: Pitch: .325", gauge: .050", drive link count: 74 — Oregon Tool, Inc., Oregon 20BPX074G product page with Fit Guide (20BPX ControlCut chain, 18 in., 74 drive links), product page for 20BPX074G (18 in. bar), feature list; the page's "Fit Guide" > Stihl lists MS 291
  • Gauge: RAPID™ Micro™ 3 | .325" | .050" | 74 drive links (23 RM3 74) — STIHL Inc. (STIHL USA), RAPID Micro 3 (RM3) .325 | .050" saw chain page (loop list with part numbers), loop list (page structured data), variant 23 RM3 74; the loop named with this saw on STIHL USA's pages
  • Gauge: 1 x STIHL 18" Rollomatic E Guide Bar, .325" P, 1.3 mm/.050" — STIHL Limited (STIHL Canada), Cut Kit 5 product page (MS 261, MS 271, MS 291), component list of the kit for the MS 261, MS 271 or MS 291 (18 in. bar kit)
  • Gauge: Pitch: .325", gauge: .050", drive link count: 74 — Oregon Tool, Inc., Oregon 20BPX074G product page with Fit Guide (20BPX ControlCut chain, 18 in., 74 drive links), product page for 20BPX074G (18 in. bar), feature list; the page's "Fit Guide" > Stihl lists MS 291
  • Drive links: MS 291 18" Light 04 Bar | 23 RM3 74 Saw Chain — STIHL Inc. (STIHL USA), MS 291 Gasoline Chainsaw product page, variant list (selector and page structured data)
  • Drive links: Fits MS 261, MS 271, MS 291, MSA 300. Includes (1) 18” Guide Bar & (2) Loops of 18” Saw Chain (23 RM3 74). — STIHL Inc. (STIHL USA), 2+1 Cut Kit 17 - 18" Guide Bar & Saw Chains product page, Product Details
  • Drive links: Pitch: .325", gauge: .050", drive link count: 74 — Oregon Tool, Inc., Oregon 20BPX074G product page with Fit Guide (20BPX ControlCut chain, 18 in., 74 drive links), product page for 20BPX074G (18 in. bar), feature list; the page's "Fit Guide" > Stihl lists MS 291
  • Stihl part number: "sku": "36950050074" — STIHL Inc. (STIHL USA), RAPID Micro 3 (RM3) .325 | .050" saw chain page (loop list with part numbers), loop list (page structured data), sku of the variant "23 RM3 74"; printed without spaces
  • Oregon part number: Part# 20BPX074G — Oregon Tool, Inc., Oregon 20BPX074G product page with Fit Guide (20BPX ControlCut chain, 18 in., 74 drive links), product page heading

18-inch bar — .063" (1.6 mm) bar with 26 RM3 chain

.325" pitch, .063" gauge, 74 drive links Verified

ChainPart numberWhy it is listed
Stihl 26 RM3 (semi-chisel)36890050074[13] One sourceThe saw maker’s own chain
Oregon 22BPX (micro chisel)22BPX074G[12] One sourceOregon lists it for this saw
Search for Oregon 22BPX074G: Amazon.com (paid link) Amazon.ca
Show the evidence for this row
  • Pitch: Bar lengths: 40, 45, 50 cm Pitch: .325" (8.25 mm) — ANDREAS STIHL AG & Co. KG, STIHL MS 271, 291 Instruction Manual / Notice d'emploi, 0458-574-8221-D (2025, English/French, CSA Z62.3 edition), p. 42, section 35.7.1 Rollomatic E guide bars (40, 45, 50 cm are the 16, 18, 20 in. bars)
  • Pitch: Includes Rollomatic E bar (18") and 2 .325” Rapid Micro 3 saw chains — STIHL Inc. (STIHL USA), 2+1 Cut Kit 5 - 18" Guide Bar & Saw Chains product page, Product Details (kit for STIHL MS 261, MS 271, MS 291, MS 300 and MSA 300)
  • Pitch: For saw sizes 38-62 cc that run .325 Inch Pitch, .063 Inch (1.6 mm) gauge, 74 drive links — Oregon Tool, Inc., Oregon 22BPX074G product page with Fit Guide (22BPX ControlCut chain, 18 in. bar, 74 drive links), product page for 22BPX074G (18 in. bar), feature list; the page's "Fit Guide" > Stihl lists MS 291
  • Gauge: RAPID™ Micro™ 3 | .325" | .063" | 74 drive links (26 RM3 74) — STIHL Inc. (STIHL USA), RAPID Micro 3 (RM3) .325" | .063" saw chain page (loop list with part numbers), loop list (page structured data), variant 26 RM3 74; the loop named in STIHL USA's cut kit for this saw
  • Gauge: For saw sizes 38-62 cc that run .325 Inch Pitch, .063 Inch (1.6 mm) gauge, 74 drive links — Oregon Tool, Inc., Oregon 22BPX074G product page with Fit Guide (22BPX ControlCut chain, 18 in. bar, 74 drive links), product page for 22BPX074G (18 in. bar), feature list; the page's "Fit Guide" > Stihl lists MS 291
  • Drive links: Fits MS 261, MS 271 FARM BOSS®, MS 291. Includes (1) 18" Guide Bar & (2) Loops of 18" Saw Chain (26 RM3 74). — STIHL Inc. (STIHL USA), 2+1 Cut Kit 5 - 18" Guide Bar & Saw Chains product page, Product Details
  • Drive links: For saw sizes 38-62 cc that run .325 Inch Pitch, .063 Inch (1.6 mm) gauge, 74 drive links — Oregon Tool, Inc., Oregon 22BPX074G product page with Fit Guide (22BPX ControlCut chain, 18 in. bar, 74 drive links), product page for 22BPX074G (18 in. bar), feature list; the page's "Fit Guide" > Stihl lists MS 291
  • Stihl part number: "sku": "36890050074" — STIHL Inc. (STIHL USA), RAPID Micro 3 (RM3) .325" | .063" saw chain page (loop list with part numbers), loop list (page structured data), sku of the variant "26 RM3 74"; printed without spaces
  • Oregon part number: Part# 22BPX074G — Oregon Tool, Inc., Oregon 22BPX074G product page with Fit Guide (22BPX ControlCut chain, 18 in. bar, 74 drive links), product page heading

20-inch bar — .050" (1.3 mm) bar with 23 RM3 chain

.325" pitch, .050" gauge, 81 drive links Verified

ChainPart numberWhy it is listed
Stihl 23 RM3 (semi-chisel)36950050081[6] One sourceThe saw maker’s own chain
Oregon 20BPX (micro chisel)20BPX081G[9] One sourceOregon lists it for this saw
Search for Oregon 20BPX081G: Amazon.com (paid link) Amazon.ca
Show the evidence for this row
  • Pitch: Bar lengths: 40, 45, 50 cm Pitch: .325" (8.25 mm) — ANDREAS STIHL AG & Co. KG, STIHL MS 271, 291 Instruction Manual / Notice d'emploi, 0458-574-8221-D (2025, English/French, CSA Z62.3 edition), p. 42, section 35.7.1 Rollomatic E guide bars (40, 45, 50 cm are the 16, 18, 20 in. bars)
  • Pitch: RAPID™ Micro™ 3 | .325" | .050" | 81 drive links (23 RM3 81) — STIHL Inc. (STIHL USA), RAPID Micro 3 (RM3) .325 | .050" saw chain page (loop list with part numbers), loop list (page structured data), variant 23 RM3 81; the loop named with this saw on STIHL USA's pages
  • Pitch: Includes Light 04 bar (20") and 2 .325” Rapid Micro 3 saw chains — STIHL Inc. (STIHL USA), 2+1 Cut Kit 18 - 20" Guide Bar & Saw Chains product page, Product Details (kit for STIHL MS 261, MS 271, MS 291, MS 300 and MSA 300)
  • Pitch: Pitch: .325", gauge: .050", drive link count: 81 — Oregon Tool, Inc., Oregon 20BPX081G product page with Fit Guide (20BPX ControlCut chain, 20 in., 81 drive links), product page for 20BPX081G (20 in. bar), feature list; the page's "Fit Guide" > Stihl lists MS 291
  • Gauge: RAPID™ Micro™ 3 | .325" | .050" | 81 drive links (23 RM3 81) — STIHL Inc. (STIHL USA), RAPID Micro 3 (RM3) .325 | .050" saw chain page (loop list with part numbers), loop list (page structured data), variant 23 RM3 81; the loop named with this saw on STIHL USA's pages
  • Gauge: Pitch: .325", gauge: .050", drive link count: 81 — Oregon Tool, Inc., Oregon 20BPX081G product page with Fit Guide (20BPX ControlCut chain, 20 in., 81 drive links), product page for 20BPX081G (20 in. bar), feature list; the page's "Fit Guide" > Stihl lists MS 291
  • Drive links: MS 291 20" Light 04 Bar | 23 RM3 81 Saw Chain — STIHL Inc. (STIHL USA), MS 291 Gasoline Chainsaw product page, variant list (selector and page structured data)
  • Drive links: Fits MS 261, MS 271, MS 291, MSA 300. Includes (1) 20” Guide Bar & (2) Loops of 20” Saw Chain (23 RM3 81). — STIHL Inc. (STIHL USA), 2+1 Cut Kit 18 - 20" Guide Bar & Saw Chains product page, Product Details
  • Drive links: Pitch: .325", gauge: .050", drive link count: 81 — Oregon Tool, Inc., Oregon 20BPX081G product page with Fit Guide (20BPX ControlCut chain, 20 in., 81 drive links), product page for 20BPX081G (20 in. bar), feature list; the page's "Fit Guide" > Stihl lists MS 291
  • Stihl part number: "sku": "36950050081" — STIHL Inc. (STIHL USA), RAPID Micro 3 (RM3) .325 | .050" saw chain page (loop list with part numbers), loop list (page structured data), sku of the variant "23 RM3 81"; printed without spaces
  • Oregon part number: Part# 20BPX081G — Oregon Tool, Inc., Oregon 20BPX081G product page with Fit Guide (20BPX ControlCut chain, 20 in., 81 drive links), product page heading

20-inch bar — .063" (1.6 mm) bar with 26 RM3 chain

.325" pitch, .063" gauge, 81 drive links Verified

ChainPart numberWhy it is listed
Stihl 26 RM3 (semi-chisel)36890050081[13] One sourceThe saw maker’s own chain
Oregon 22BPX (micro chisel)22BPX081G[15] One sourceOregon lists it for this saw
Search for Oregon 22BPX081G: Amazon.com (paid link) Amazon.ca
Show the evidence for this row
  • Pitch: Bar lengths: 40, 45, 50 cm Pitch: .325" (8.25 mm) — ANDREAS STIHL AG & Co. KG, STIHL MS 271, 291 Instruction Manual / Notice d'emploi, 0458-574-8221-D (2025, English/French, CSA Z62.3 edition), p. 42, section 35.7.1 Rollomatic E guide bars (40, 45, 50 cm are the 16, 18, 20 in. bars)
  • Pitch: Includes Rollomatic E bar (20") and 2 .325” Rapid Micro 3 saw chains — STIHL Inc. (STIHL USA), 2+1 Cut Kit 6 - 20" Guide Bar & Saw Chains product page, Product Details (kit for STIHL MS 261, MS 271, MS 291, MS 300 and MSA 300)
  • Pitch: For saw sizes 38-62 cc that run .325 Inch Pitch, .063 Inch (1.6 mm) gauge, 81 drive links — Oregon Tool, Inc., Oregon 22BPX081G product page with Fit Guide (22BPX ControlCut chain, 20 in. bar, 81 drive links), product page for 22BPX081G (20 in. bar), feature list; the page's "Fit Guide" > Stihl lists MS 291
  • Gauge: RAPID™ Micro™ 3 | .325" | .063" | 81 drive links (26 RM3 81) — STIHL Inc. (STIHL USA), RAPID Micro 3 (RM3) .325" | .063" saw chain page (loop list with part numbers), loop list (page structured data), variant 26 RM3 81; the loop named in STIHL USA's cut kit for this saw
  • Gauge: For saw sizes 38-62 cc that run .325 Inch Pitch, .063 Inch (1.6 mm) gauge, 81 drive links — Oregon Tool, Inc., Oregon 22BPX081G product page with Fit Guide (22BPX ControlCut chain, 20 in. bar, 81 drive links), product page for 22BPX081G (20 in. bar), feature list; the page's "Fit Guide" > Stihl lists MS 291
  • Drive links: Fits MS 261, MS 271, MS 291. Includes (1) 20" Guide Bar & (2) Loops of 20" Saw Chain (26 RM3 81). — STIHL Inc. (STIHL USA), 2+1 Cut Kit 6 - 20" Guide Bar & Saw Chains product page, Product Details
  • Drive links: For saw sizes 38-62 cc that run .325 Inch Pitch, .063 Inch (1.6 mm) gauge, 81 drive links — Oregon Tool, Inc., Oregon 22BPX081G product page with Fit Guide (22BPX ControlCut chain, 20 in. bar, 81 drive links), product page for 22BPX081G (20 in. bar), feature list; the page's "Fit Guide" > Stihl lists MS 291
  • Stihl part number: "sku": "36890050081" — STIHL Inc. (STIHL USA), RAPID Micro 3 (RM3) .325" | .063" saw chain page (loop list with part numbers), loop list (page structured data), sku of the variant "26 RM3 81"; printed without spaces
  • Oregon part number: Part# 22BPX081G — Oregon Tool, Inc., Oregon 22BPX081G product page with Fit Guide (22BPX ControlCut chain, 20 in. bar, 81 drive links), product page heading

Confirm before you order

  1. Read the bar. Most bars have the pitch, gauge and drive-link count stamped near the mounting end. Those numbers describe the bar actually on your saw, which may not be the one it left the factory with.
  2. If the stamp is worn off, count the drive links on the old chain: the teeth on the inside of the loop that ride in the bar groove.
  3. Match all three numbers to one row of the Stihl MS 291 table above. A chain with the right length but the wrong gauge or pitch will not fit the bar or the sprocket.

How to find pitch, gauge and drive links step by step

If your saw matches none of the rows, its bar or sprocket has probably been changed. Go by what is stamped on the bar, or ask a dealer.

Numbers you may see elsewhere

These figures appear on other pages for this saw. They are listed with the reason they are not used in the table above.

  • 16-inch bar, drive links: 66 (sawchaincheck.vercel.app (third-party fit site))[10] — A fit site with no STIHL or Oregon document behind the figure; STIHL USA's 16 in. cut kits for this saw carry 67-link loops.
  • 20-inch bar, drive links: 78 (sawchaincheck.vercel.app (third-party fit site))[10] — Contradicts STIHL USA's variant name and cut kits and Oregon's fit guide, which all give 81 for the 20 in. bar on this saw.

Two gauges with the same drive-link counts

STIHL USA's product page (retrieved 2026-11-18) names the saw with 23 RM3 loops, which STIHL's chain page defines as .325" pitch and .050" gauge. STIHL USA also lists two sets of replacement kits that all say they fit this saw: Cut Kits 4, 5 and 6 with 26 RM3 loops (.063") and Cut Kits 16, 17 and 18 with 23 RM3 loops (.050"), at 16, 18 and 20 inches. The drive-link counts are 67, 74 and 81 in both sets.

STIHL's 2025 Canadian manual for the MS 271 and MS 291 specifies a 1.6 mm (.063") groove and 26 RM3 chain, while STIHL Canada's Cut Kit 5 for the same saws is an 18-inch bar with a 1.3 mm (.050") groove. No STIHL document opened for this record dates the change from one gauge to the other, so the bar on the saw has to be read.

STIHL's manual puts the rule this way: the drive link gauge of the saw chain must match the groove width of the guide bar, and non-matching components can damage the cutting attachment beyond repair after a short period of operation.

Bar lengths

STIHL USA lists the saw with 18-inch and 20-inch bars. STIHL Canada's product page lists 16-inch, 18-inch and 20-inch versions, and the Canadian manual gives bar lengths of 40, 45 and 50 cm. The 16-inch figures here come from STIHL USA's 16-inch cut kits, which name this saw.

20-inch bar: 81 drive links

STIHL USA's variant name, both of its 20-inch cut kits for this saw and Oregon's fit guide give 81 drive links for the 20-inch bar. A figure of 78 appears on at least one fit site; it is recorded under the 20-inch configuration as rejected.

Part numbers

STIHL USA's website prints loop part numbers as eleven digits without spaces (for example 36950050068), and they are recorded here exactly as printed. Dealers may write the same number in groups, as in the 3005 005 9900 style used on one dealer listing of a STIHL cut kit.

STIHL Canada's website sells its .325" .050" loops under other names and part numbers (for example 23RSP74E, 36900020074), so the STIHL part numbers in this record are the United States ones.

Sources

  1. STIHL Inc. (STIHL USA). MS 291 Gasoline Chainsaw product page. Saw maker’s own document; retrieved November 18, 2026
  2. STIHL Inc. (STIHL USA). 2+1 Cut Kit 5 - 18" Guide Bar & Saw Chains product page. Saw maker’s own document; retrieved November 18, 2026
  3. STIHL Inc. (STIHL USA). 2+1 Cut Kit 17 - 18" Guide Bar & Saw Chains product page. Saw maker’s own document; retrieved November 18, 2026
  4. ANDREAS STIHL AG & Co. KG. STIHL MS 271, 291 Instruction Manual / Notice d'emploi, 0458-574-8221-D (2025, English/French, CSA Z62.3 edition). Saw maker’s own document; retrieved November 18, 2026
  5. STIHL Limited (STIHL Canada). Cut Kit 5 product page (MS 261, MS 271, MS 291). Saw maker’s own document; retrieved November 18, 2026
  6. STIHL Inc. (STIHL USA). RAPID Micro 3 (RM3) .325 | .050" saw chain page (loop list with part numbers). Saw maker’s own document; retrieved November 18, 2026
  7. Oregon Tool, Inc. Oregon 20BPX074G product page with Fit Guide (20BPX ControlCut chain, 18 in., 74 drive links). Chain or bar maker’s fit data; retrieved November 18, 2026
  8. STIHL Inc. (STIHL USA). 2+1 Cut Kit 18 - 20" Guide Bar & Saw Chains product page. Saw maker’s own document; retrieved November 18, 2026
  9. Oregon Tool, Inc. Oregon 20BPX081G product page with Fit Guide (20BPX ControlCut chain, 20 in., 81 drive links). Chain or bar maker’s fit data; retrieved November 18, 2026
  10. sawchaincheck.vercel.app (third-party fit site). Stihl MS291 Chain & Bar Guide. Other page; retrieved November 18, 2026
  11. STIHL Inc. (STIHL USA). 2+1 Cut Kit 16 - 16" Guide Bar & Saw Chains product page. Saw maker’s own document; retrieved November 18, 2026
  12. Oregon Tool, Inc. Oregon 22BPX074G product page with Fit Guide (22BPX ControlCut chain, 18 in. bar, 74 drive links). Chain or bar maker’s fit data; retrieved November 18, 2026
  13. STIHL Inc. (STIHL USA). RAPID Micro 3 (RM3) .325" | .063" saw chain page (loop list with part numbers). Saw maker’s own document; retrieved November 18, 2026
  14. STIHL Inc. (STIHL USA). 2+1 Cut Kit 6 - 20" Guide Bar & Saw Chains product page. Saw maker’s own document; retrieved November 18, 2026
  15. Oregon Tool, Inc. Oregon 22BPX081G product page with Fit Guide (22BPX ControlCut chain, 20 in. bar, 81 drive links). Chain or bar maker’s fit data; retrieved November 18, 2026
  16. STIHL Inc. (STIHL USA). 2+1 Cut Kit 4 - 16" Guide Bar & Saw Chains product page. Saw maker’s own document; retrieved November 18, 2026
  17. Oregon Tool, Inc. Oregon 22BPX067G product page with Fit Guide (22BPX ControlCut chain, 16 in. bar, 67 drive links). Chain or bar maker’s fit data; retrieved November 18, 2026

Seen a number here that does not match your saw or its manual? Report it.