Husqvarna 440 chain size

Data last verified · 10 sources · Reviewed by Phong Hao on November 18, 2026

Husqvarna's US and Canadian documents give the 440 the same chain specification as the 435: .325 inch pitch and .050 (1.3 mm) gauge on 13, 15, 16 or 18 inch bars, taking 56, 64, 66 and 72 drive links. It is currently sold with an 18 inch bar and H30 chain, a 72 link loop, and the manual also lists SP33G. Husqvarna's chain page sells 20 inch SP33G loops as well, but the 440 manual table stops at 18 inches.

Husqvarna 440 with the 18-inch bar it is sold with: .325" pitch, .050" gauge, 72 drive links. Other bar lengths are in the table below.

Husqvarna 440 chain size by bar length

Links marked “(paid link)” go to Amazon and earn this site a commission if you buy. As an Amazon Associate I earn from qualifying purchases. How this works

BarApplies toPitchGaugeDrive linksStatus
13″ (33 cm)All versions.325"[1][2].050"[1][3][4]56[1][3][4][5]Verified
15″ (38 cm)All versions.325"[1][2].050"[1]64[1][5]One source
16″ (41 cm)All versions.325"[1][2].050"[1][3][4]66[1][3][4][5]Verified
18″ (46 cm) stockAll versions.325"[1][2].050"[1][2][3][4]72[1][3][4][5]Verified

Numbers in brackets point to the sources at the foot of the page. “Verified” means two or more separate documents agree and at least one comes from a manufacturer. “One source” means a single manufacturer document; two editions of the same manual count as one. Rows where sources disagree carry no shopping link.

Chains for each set-up

13-inch bar

.325" pitch, .050" gauge, 56 drive links Verified

ChainPart numberWhy it is listed
Husqvarna X-Cut SP33G581 64 36-56[3] One sourceThe saw maker’s own chain
Search for .325 .050 56 drive link chainsaw chain: Amazon.com (paid link) Amazon.ca

Other saws that take a chain with .325" pitch, .050" gauge, 56 drive links

Show the evidence for this row
  • Pitch: 13 | 0.325 | 1.3/0.050 | 10T | 56 — Husqvarna, Operator's manual: 435, 440 (EN/ES/FR), publication 1270-010, 25.09.2023, p. 34, "Recommended cutting equipment" table, row 13 (cells joined with |: length, pitch, gauge, max. nose radius, drive links)
  • Pitch: Pitch | .325" | Recommended bar length, max | 18 in | Chain type | H30 | Bar length (inch) | 18 in | Sprocket type | Spur 7 | Gauge | .050" — Husqvarna, Husqvarna 440 product page (US), Specifications > Equipment, article 970 61 23-38 (pitch is a saw-level value; the article shown carries a 18 in bar)
  • Gauge: 13 | 0.325 | 1.3/0.050 | 10T | 56 — Husqvarna, Operator's manual: 435, 440 (EN/ES/FR), publication 1270-010, 25.09.2023, p. 34, "Recommended cutting equipment" table, row 13 (cells joined with |: length, pitch, gauge, max. nose radius, drive links)
  • Gauge: 13" / 56DL | Gauge | .050" | Bar length (inch) | 13 in | Bar length | 33 cm | Drive links | 56 | SKU: 581 64 36-56 — Husqvarna, X-CUT SP33G, .325" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 581 64 36-56; the page's "Fits To Model" list includes 440
  • Gauge: 13" / 56DL | Bar length (inch) | 13 in | Bar length | 33 cm | Gauge | .050" | SKU: 596 19 97-56 — Husqvarna, X-FORCE Laminate Sprocket Nose, .325" pitch, .050 gauge, small mount (XF-250): bar product page (US), Product Options, variant row for SKU 596 19 97-56; the page's "Fits To Model" list includes 440
  • Drive links: 13 | 0.325 | 1.3/0.050 | 10T | 56 — Husqvarna, Operator's manual: 435, 440 (EN/ES/FR), publication 1270-010, 25.09.2023, p. 34, "Recommended cutting equipment" table, row 13 (cells joined with |: length, pitch, gauge, max. nose radius, drive links)
  • Drive links: 13 | 0,325 | 1,3 | 10T | Husqvarna H30 | 56 — Husqvarna, Operator's manual: 435, 435e, 440e (EN/FR/ES), 1153135-49 Rev.8, 2017-05-02, p. 32, "Bar and chain combinations" table (models 435, 435e and 440e), row 13 (cells joined with |)
  • Drive links: 13" / 56DL | Gauge | .050" | Bar length (inch) | 13 in | Bar length | 33 cm | Drive links | 56 | SKU: 581 64 36-56 — Husqvarna, X-CUT SP33G, .325" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 581 64 36-56; the page's "Fits To Model" list includes 440
  • Drive links: 13" / 56DL | Bar length (inch) | 13 in | Bar length | 33 cm | Gauge | .050" | SKU: 596 19 97-56 — Husqvarna, X-FORCE Laminate Sprocket Nose, .325" pitch, .050 gauge, small mount (XF-250): bar product page (US), Product Options, variant row for SKU 596 19 97-56; the page's "Fits To Model" list includes 440
  • Husqvarna part number: 13" / 56DL | Gauge | .050" | Bar length (inch) | 13 in | Bar length | 33 cm | Drive links | 56 | SKU: 581 64 36-56 — Husqvarna, X-CUT SP33G, .325" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 581 64 36-56; the page's "Fits To Model" list includes 440

15-inch bar

.325" pitch, .050" gauge, 64 drive links One source

ChainPart numberWhy it is listed
Oregon PowerCut 20LPX20LPX064G[6] One sourceSame pitch, gauge and link count; its maker does not list this saw
Search for Oregon 20LPX064G: Amazon.com (paid link) Amazon.ca

Other saws that take a chain with .325" pitch, .050" gauge, 64 drive links

Show the evidence for this row
  • Pitch: 15 | 0.325 | 1.3/0.050 | 10T | 64 — Husqvarna, Operator's manual: 435, 440 (EN/ES/FR), publication 1270-010, 25.09.2023, p. 34, "Recommended cutting equipment" table, row 15 (cells joined with |: length, pitch, gauge, max. nose radius, drive links)
  • Pitch: Pitch | .325" | Recommended bar length, max | 18 in | Chain type | H30 | Bar length (inch) | 18 in | Sprocket type | Spur 7 | Gauge | .050" — Husqvarna, Husqvarna 440 product page (US), Specifications > Equipment, article 970 61 23-38 (pitch is a saw-level value; the article shown carries a 18 in bar)
  • Gauge: 15 | 0.325 | 1.3/0.050 | 10T | 64 — Husqvarna, Operator's manual: 435, 440 (EN/ES/FR), publication 1270-010, 25.09.2023, p. 34, "Recommended cutting equipment" table, row 15 (cells joined with |: length, pitch, gauge, max. nose radius, drive links)
  • Drive links: 15 | 0.325 | 1.3/0.050 | 10T | 64 — Husqvarna, Operator's manual: 435, 440 (EN/ES/FR), publication 1270-010, 25.09.2023, p. 34, "Recommended cutting equipment" table, row 15 (cells joined with |: length, pitch, gauge, max. nose radius, drive links)
  • Drive links: 15 | 0,325 | 1,3 | 10T | Husqvarna H30 | 64 — Husqvarna, Operator's manual: 435, 435e, 440e (EN/FR/ES), 1153135-49 Rev.8, 2017-05-02, p. 32, "Bar and chain combinations" table (models 435, 435e and 440e), row 15 (cells joined with |)
  • Oregon part number: Oregon 20LPX PowerCut Saw Chain for 15 in. Bar - 64 Drive Links, Fits Echo, Makita and Dolmar | Part# 20LPX064G — Oregon Tool, Inc., Oregon 20LPX064G product page (specifications and Fit Guide), Product heading and Part#; Product Details: ".325 Inch Pitch, .050 Inch (1.3 mm) gauge, 64 drive links"; the page's Fit Guide does not list this Husqvarna model

16-inch bar

.325" pitch, .050" gauge, 66 drive links Verified

ChainPart numberWhy it is listed
Husqvarna X-Cut SP33G581 64 36-66[3] One sourceThe saw maker’s own chain
Husqvarna X-Cut SP33G (retail pack)581 64 36-02[3] One sourceThe saw maker’s own chain
Oregon SpeedCut 95TXL95TXL066G[7] One sourceOregon lists it for this saw
Oregon ControlCut 20BPX20BPX066G[8] One sourceOregon lists it for this saw
Search for Oregon 95TXL066G: Amazon.com (paid link) Amazon.ca

Other saws that take a chain with .325" pitch, .050" gauge, 66 drive links

Show the evidence for this row
  • Pitch: 16 | 0.325 | 1.3/0.050 | 10T | 66 — Husqvarna, Operator's manual: 435, 440 (EN/ES/FR), publication 1270-010, 25.09.2023, p. 34, "Recommended cutting equipment" table, row 16 (cells joined with |: length, pitch, gauge, max. nose radius, drive links)
  • Pitch: Pitch | .325" | Recommended bar length, max | 18 in | Chain type | H30 | Bar length (inch) | 18 in | Sprocket type | Spur 7 | Gauge | .050" — Husqvarna, Husqvarna 440 product page (US), Specifications > Equipment, article 970 61 23-38 (pitch is a saw-level value; the article shown carries a 18 in bar)
  • Gauge: 16 | 0.325 | 1.3/0.050 | 10T | 66 — Husqvarna, Operator's manual: 435, 440 (EN/ES/FR), publication 1270-010, 25.09.2023, p. 34, "Recommended cutting equipment" table, row 16 (cells joined with |: length, pitch, gauge, max. nose radius, drive links)
  • Gauge: 16" / 66DL | Gauge | .050" | Bar length (inch) | 16 in | Bar length | 40 cm | Drive links | 66 | SKU: 581 64 36-66 — Husqvarna, X-CUT SP33G, .325" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 581 64 36-66; the page's "Fits To Model" list includes 440
  • Gauge: 16" / 66DL | Bar length (inch) | 16 in | Bar length | 40 cm | Gauge | .050" | SKU: 596 19 97-66 — Husqvarna, X-FORCE Laminate Sprocket Nose, .325" pitch, .050 gauge, small mount (XF-250): bar product page (US), Product Options, variant row for SKU 596 19 97-66; the page's "Fits To Model" list includes 440
  • Drive links: 16 | 0.325 | 1.3/0.050 | 10T | 66 — Husqvarna, Operator's manual: 435, 440 (EN/ES/FR), publication 1270-010, 25.09.2023, p. 34, "Recommended cutting equipment" table, row 16 (cells joined with |: length, pitch, gauge, max. nose radius, drive links)
  • Drive links: 16 | 0,325 | 1,3 | 10T | Husqvarna H30 | 66 — Husqvarna, Operator's manual: 435, 435e, 440e (EN/FR/ES), 1153135-49 Rev.8, 2017-05-02, p. 32, "Bar and chain combinations" table (models 435, 435e and 440e), row 16 (cells joined with |)
  • Drive links: 16" / 66DL | Gauge | .050" | Bar length (inch) | 16 in | Bar length | 40 cm | Drive links | 66 | SKU: 581 64 36-66 — Husqvarna, X-CUT SP33G, .325" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 581 64 36-66; the page's "Fits To Model" list includes 440
  • Drive links: 16" / 66DL | Bar length (inch) | 16 in | Bar length | 40 cm | Gauge | .050" | SKU: 596 19 97-66 — Husqvarna, X-FORCE Laminate Sprocket Nose, .325" pitch, .050 gauge, small mount (XF-250): bar product page (US), Product Options, variant row for SKU 596 19 97-66; the page's "Fits To Model" list includes 440
  • Husqvarna part number: 16" / 66DL | Gauge | .050" | Bar length (inch) | 16 in | Bar length | 40 cm | Drive links | 66 | SKU: 581 64 36-66 — Husqvarna, X-CUT SP33G, .325" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 581 64 36-66; the page's "Fits To Model" list includes 440
  • Husqvarna part number: 16" / 66DL Retail | Gauge | .050" | Bar length (inch) | 16 in | Bar length | 40 cm | Drive links | 66 | SKU: 581 64 36-02 — Husqvarna, X-CUT SP33G, .325" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 581 64 36-02; the page's "Fits To Model" list includes 440
  • Oregon part number: Oregon 95TXL SpeedCut Saw Chain for 16 in. Bar - 66 Drive Links - fits Echo, Husqvarna and Jonsered, Craftsman, Makita and others | Part# 95TXL066G — Oregon Tool, Inc., Oregon 95TXL066G product page (specifications and Fit Guide), Product heading and Part#; Product Details: ".325 Inch narrow kerf Pitch, .050 Inch (1.3 mm) gauge, 66 drive links"; the page's Fit Guide lists Husqvarna "440" (the list is per chain family, not per loop length)
  • Oregon part number: Oregon 20BPX ControlCut Saw Chain for 16 in. Bar - 66 Drive Links - fits Echo, Homelite, McCulloch, Makita,Jonsered Ryobi and others | Part# 20BPX066G — Oregon Tool, Inc., Oregon 20BPX066G product page (specifications and Fit Guide), Product heading and Part#; Product Details: ".325 Inch Pitch, .050 Inch (1.3 mm) gauge, 66 drive links"; the page's Fit Guide lists Husqvarna "440" (the list is per chain family, not per loop length)

18-inch bar

.325" pitch, .050" gauge, 72 drive links Verified

ChainPart numberWhy it is listed
Husqvarna X-Cut SP33G581 64 36-72[3] One sourceThe saw maker’s own chain
Husqvarna X-Cut SP33G (retail pack)581 64 36-03[3] One sourceThe saw maker’s own chain
Oregon SpeedCut 95TXL95TXL072G[9] One sourceOregon lists it for this saw
Oregon ControlCut 20BPX20BPX072G[10] One sourceOregon lists it for this saw
Search for Oregon 95TXL072G: Amazon.com (paid link) Amazon.ca

Other saws that take a chain with .325" pitch, .050" gauge, 72 drive links

Show the evidence for this row
  • Pitch: 18 | 0.325 | 1.3/0.050 | 10T | 72 — Husqvarna, Operator's manual: 435, 440 (EN/ES/FR), publication 1270-010, 25.09.2023, p. 34, "Recommended cutting equipment" table, row 18 (cells joined with |: length, pitch, gauge, max. nose radius, drive links)
  • Pitch: Pitch | .325" | Recommended bar length, max | 18 in | Chain type | H30 | Bar length (inch) | 18 in | Sprocket type | Spur 7 | Gauge | .050" — Husqvarna, Husqvarna 440 product page (US), Specifications > Equipment, article 970 61 23-38 (pitch is a saw-level value; the article shown carries a 18 in bar)
  • Gauge: 18 | 0.325 | 1.3/0.050 | 10T | 72 — Husqvarna, Operator's manual: 435, 440 (EN/ES/FR), publication 1270-010, 25.09.2023, p. 34, "Recommended cutting equipment" table, row 18 (cells joined with |: length, pitch, gauge, max. nose radius, drive links)
  • Gauge: Pitch | .325" | Recommended bar length, max | 18 in | Chain type | H30 | Bar length (inch) | 18 in | Sprocket type | Spur 7 | Gauge | .050" — Husqvarna, Husqvarna 440 product page (US), Specifications > Equipment, article 970 61 23-38 (pitch is a saw-level value; the article shown carries a 18 in bar)
  • Gauge: 18" / 72DL | Gauge | .050" | Bar length (inch) | 18 in | Bar length | 45 cm | Drive links | 72 | SKU: 581 64 36-72 — Husqvarna, X-CUT SP33G, .325" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 581 64 36-72; the page's "Fits To Model" list includes 440
  • Gauge: 18" / 72DL | Bar length (inch) | 18 in | Bar length | 45 cm | Gauge | .050" | SKU: 596 19 97-72 — Husqvarna, X-FORCE Laminate Sprocket Nose, .325" pitch, .050 gauge, small mount (XF-250): bar product page (US), Product Options, variant row for SKU 596 19 97-72; the page's "Fits To Model" list includes 440
  • Drive links: 18 | 0.325 | 1.3/0.050 | 10T | 72 — Husqvarna, Operator's manual: 435, 440 (EN/ES/FR), publication 1270-010, 25.09.2023, p. 34, "Recommended cutting equipment" table, row 18 (cells joined with |: length, pitch, gauge, max. nose radius, drive links)
  • Drive links: 18 | 0,325 | 1,3 | 10T | Husqvarna H30 | 72 — Husqvarna, Operator's manual: 435, 435e, 440e (EN/FR/ES), 1153135-49 Rev.8, 2017-05-02, p. 32, "Bar and chain combinations" table (models 435, 435e and 440e), row 18 (cells joined with |)
  • Drive links: 18" / 72DL | Gauge | .050" | Bar length (inch) | 18 in | Bar length | 45 cm | Drive links | 72 | SKU: 581 64 36-72 — Husqvarna, X-CUT SP33G, .325" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 581 64 36-72; the page's "Fits To Model" list includes 440
  • Drive links: 18" / 72DL | Bar length (inch) | 18 in | Bar length | 45 cm | Gauge | .050" | SKU: 596 19 97-72 — Husqvarna, X-FORCE Laminate Sprocket Nose, .325" pitch, .050 gauge, small mount (XF-250): bar product page (US), Product Options, variant row for SKU 596 19 97-72; the page's "Fits To Model" list includes 440
  • Husqvarna part number: 18" / 72DL | Gauge | .050" | Bar length (inch) | 18 in | Bar length | 45 cm | Drive links | 72 | SKU: 581 64 36-72 — Husqvarna, X-CUT SP33G, .325" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 581 64 36-72; the page's "Fits To Model" list includes 440
  • Husqvarna part number: 18" / 72DL Retail | Gauge | .050" | Bar length (inch) | 18 in | Bar length | 45 cm | Drive links | 72 | SKU: 581 64 36-03 — Husqvarna, X-CUT SP33G, .325" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 581 64 36-03; the page's "Fits To Model" list includes 440
  • Oregon part number: Oregon 95TXL SpeedCut Chainsaw Chain for 18-Inch Bar -72 Drive Links – fits Husqvarna, Dolmar, Jonsered and more | Part# 95TXL072G — Oregon Tool, Inc., Oregon 95TXL072G product page (specifications and Fit Guide), Product heading and Part#; Product Details: ".325 Inch narrow kerf Pitch, .050 Inch (1.3 mm) gauge, 72 drive links"; the page's Fit Guide lists Husqvarna "440" (the list is per chain family, not per loop length)
  • Oregon part number: Oregon 20BPX ControlCut Saw Chain for 18 in. Bar - 72 Drive Links - fits Echo, Craftsman, Homelite, Poulan, Husqvarna, Makita and others | Part# 20BPX072G — Oregon Tool, Inc., Oregon 20BPX072G product page (specifications and Fit Guide), Product heading and Part#; Product Details: ".325 Inch Pitch, .050 Inch (1.3 mm) gauge, 72 drive links"; the page's Fit Guide lists Husqvarna "440" (the list is per chain family, not per loop length)

Confirm before you order

  1. Read the bar. Most bars have the pitch, gauge and drive-link count stamped near the mounting end. Those numbers describe the bar actually on your saw, which may not be the one it left the factory with.
  2. If the stamp is worn off, count the drive links on the old chain: the teeth on the inside of the loop that ride in the bar groove.
  3. Match all three numbers to one row of the Husqvarna 440 table above. A chain with the right length but the wrong gauge or pitch will not fit the bar or the sprocket.

How to find pitch, gauge and drive links step by step

If your saw matches none of the rows, its bar or sprocket has probably been changed. Go by what is stamped on the bar, or ask a dealer.

H30 and SP33G

The product page names the supplied chain as H30; the current manual lists Husqvarna SP33G and Husqvarna H30 for every bar length. The Husqvarna chain pages opened for this record cover SP33G but not H30, so part numbers are given for SP33G only.

The manual has a section on Pixel, Husqvarna's narrow-cut bar and chain system, and says both guide bar and saw chain need to be Pixel to get its benefits.

Nominal bar length

A footnote in the manual says the nominal guide bar size is not necessarily the same as the cutting length. The drive-link counts here are tied to the nominal sizes in the manual table: 13, 15, 16 and 18 inches.

Loops on the same chain page that are not for this saw

Husqvarna's SP33G page also sells 20 inch loops with 78 and 80 links. The 440 manual table stops at 18 inches and 72 links.

15 inch bars

The manual lists a 15 inch bar with 64 links, but Husqvarna's US SP33G and X-Force bar pages show no 15 inch variant. The only chain given for that bar is an Oregon loop of the same pitch, gauge and link count, which Oregon's own page does not list against Husqvarna saws.

Earlier manual edition

The 2017 manual used as a second document covers models 435, 435e and 440e and lists H30 only; its drive-link counts match the current 435, 440 manual.

How Oregon equivalents were matched

Oregon's product pages carry a fit list for each chain, but the list is the same for every loop length of a chain family. The drive-link counts in this record therefore come from Husqvarna's documents; Oregon's pages are used only for the Oregon part number and for whether Oregon names this saw.

Sources

  1. Husqvarna. Operator's manual: 435, 440 (EN/ES/FR), publication 1270-010, 25.09.2023. Saw maker’s own document; retrieved November 18, 2026
  2. Husqvarna. Husqvarna 440 product page (US). Saw maker’s own document; retrieved November 18, 2026
  3. Husqvarna. X-CUT SP33G, .325" pitch, .050 gauge: chain product page (US). Saw maker’s own document; retrieved November 18, 2026
  4. Husqvarna. X-FORCE Laminate Sprocket Nose, .325" pitch, .050 gauge, small mount (XF-250): bar product page (US). Saw maker’s own document; retrieved November 18, 2026
  5. Husqvarna. Operator's manual: 435, 435e, 440e (EN/FR/ES), 1153135-49 Rev.8, 2017-05-02. Saw maker’s own document; retrieved November 18, 2026
  6. Oregon Tool, Inc. Oregon 20LPX064G product page (specifications and Fit Guide). Chain or bar maker’s fit data; retrieved November 18, 2026
  7. Oregon Tool, Inc. Oregon 95TXL066G product page (specifications and Fit Guide). Chain or bar maker’s fit data; retrieved November 18, 2026
  8. Oregon Tool, Inc. Oregon 20BPX066G product page (specifications and Fit Guide). Chain or bar maker’s fit data; retrieved November 18, 2026
  9. Oregon Tool, Inc. Oregon 95TXL072G product page (specifications and Fit Guide). Chain or bar maker’s fit data; retrieved November 18, 2026
  10. Oregon Tool, Inc. Oregon 20BPX072G product page (specifications and Fit Guide). Chain or bar maker’s fit data; retrieved November 18, 2026

Seen a number here that does not match your saw or its manual? Report it.