Husqvarna 455 Rancher chain size
Husqvarna's US and Canadian manuals for the 455 Rancher list a single pitch, 3/8 inch, on 15, 16, 18, 20 and 24 inch bars, and every length comes in two gauges: .050 (1.3 mm) and .058 (1.5 mm). The drive-link count is the same in both gauges, 72 on the 20 inch bar the saw is currently sold with, so the gauge stamped on the bar decides which loop fits. Figures of 78 or 80 links quoted for this saw describe .325 pitch loops, which Husqvarna does not list for it in North America.
Husqvarna 455 Rancher, 20-inch bar, .050" (1.3 mm) bar: 3/8" pitch, .050" gauge, 72 drive links. Other versions of this saw take a different chain. Check which one you have below.
Which version do you have?
Bar groove gauge One source
- .050" (1.3 mm) bar
- .058" (1.5 mm) bar
How to tell: Read the gauge marked on the guide bar (1.3 mm / .050 or 1.5 mm / .058), normally stamped near the mounting end with the bar length. If it is unreadable, look up the number stamped on the old chain's drive links; chain makers code the gauge into that number.[1][2]
Husqvarna 455 Rancher chain size by bar length
Links marked “(paid link)” go to Amazon and earn this site a commission if you buy. As an Amazon Associate I earn from qualifying purchases. How this works
| Bar | Applies to | Pitch | Gauge | Drive links | Status |
|---|---|---|---|---|---|
| 15″ (38 cm) | .050" (1.3 mm) bar | 3/8"[1][2] | .050"[1][2] | 56[1][2] | One source |
| 15″ (38 cm) | .058" (1.5 mm) bar | 3/8"[1][2] | .058"[1][2] | 56[1][2] | One source |
| 16″ (41 cm) | .050" (1.3 mm) bar | 3/8"[1][2] | .050"[1][2] | 60[1][2] | One source |
| 16″ (41 cm) | .058" (1.5 mm) bar | 3/8"[1][2] | .058"[1][2] | 60[1][2] | One source |
| 18″ (46 cm) | .050" (1.3 mm) bar | 3/8"[1][2] | .050"[1][2][5][6] | 68[1][2][5][6] | One source |
| 18″ (46 cm) | .058" (1.5 mm) bar | 3/8"[1][2] | .058"[1][2][6][14] | 68[1][2][6][14] | One source |
| 20″ (51 cm) stock | .050" (1.3 mm) bar | 3/8"[1][2][8] | .050"[1][2][5][6] | 72[1][2][5][6] | Verified |
| 20″ (51 cm) | .058" (1.5 mm) bar | 3/8"[1][2] | .058"[1][2][6][14] | 72[1][2][6][14] | One source |
| 24″ (61 cm) | .050" (1.3 mm) bar | 3/8"[1][2] | .050"[1][2][5][6] | 84[1][2][5][6] | One source |
| 24″ (61 cm) | .058" (1.5 mm) bar | 3/8"[1][2] | .058"[1][2] | 84[1][2] | One source |
Numbers in brackets point to the sources at the foot of the page. “Verified” means two or more separate documents agree and at least one comes from a manufacturer. “One source” means a single manufacturer document; two editions of the same manual count as one. Rows where sources disagree carry no shopping link.
Chains for each set-up
15-inch bar — .050" (1.3 mm) bar
3/8" pitch, .050" gauge, 56 drive links One source
Search for 3/8 .050 56 drive link chainsaw chain: Amazon.com (paid link) Amazon.caShow the evidence for this row
- Pitch:
15/38 | 3/8 | 0.050/1.3 | 11T | 56
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.050/1.3 block, row 15/38 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Pitch:
15/38 | 3/8 | 0.050/1.3 | 11T | 56
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.050/1.3 block, row 15/38 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
15/38 | 3/8 | 0.050/1.3 | 11T | 56
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.050/1.3 block, row 15/38 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
15/38 | 3/8 | 0.050/1.3 | 11T | 56
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.050/1.3 block, row 15/38 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Drive links:
15/38 | 3/8 | 0.050/1.3 | 11T | 56
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.050/1.3 block, row 15/38 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Drive links:
15/38 | 3/8 | 0.050/1.3 | 11T | 56
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.050/1.3 block, row 15/38 (cells joined with |: length, pitch, gauge, max. nose radius, drive links)
15-inch bar — .058" (1.5 mm) bar
3/8" pitch, .058" gauge, 56 drive links One source
Search for 3/8 .058 56 drive link chainsaw chain: Amazon.com (paid link) Amazon.caShow the evidence for this row
- Pitch:
15/38 | 3/8 | 0.058/1.5 | 11T | 56
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.058/1.5 block, row 15/38 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Pitch:
15/38 | 3/8 | 0.058/1.5 | 11T | 56
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.058/1.5 block, row 15/38 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
15/38 | 3/8 | 0.058/1.5 | 11T | 56
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.058/1.5 block, row 15/38 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
15/38 | 3/8 | 0.058/1.5 | 11T | 56
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.058/1.5 block, row 15/38 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Drive links:
15/38 | 3/8 | 0.058/1.5 | 11T | 56
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.058/1.5 block, row 15/38 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Drive links:
15/38 | 3/8 | 0.058/1.5 | 11T | 56
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.058/1.5 block, row 15/38 (cells joined with |: length, pitch, gauge, max. nose radius, drive links)
16-inch bar — .050" (1.3 mm) bar
3/8" pitch, .050" gauge, 60 drive links One source
| Chain | Part number | Why it is listed |
|---|---|---|
| Husqvarna X-Cut C83 | 585 55 00-60[3] One source | The saw maker’s own chain |
| Oregon PowerCut 72EXL | 72EXL060G[4] One source | Oregon lists it for this saw |
Other saws that take a chain with 3/8" pitch, .050" gauge, 60 drive links
Show the evidence for this row
- Pitch:
16/40 | 3/8 | 0.050/1.3 | 11T | 60
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.050/1.3 block, row 16/40 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Pitch:
16/41 | 3/8 | 0.050/1.3 | 11T | 60
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.050/1.3 block, row 16/41 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
16/40 | 3/8 | 0.050/1.3 | 11T | 60
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.050/1.3 block, row 16/40 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
16/41 | 3/8 | 0.050/1.3 | 11T | 60
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.050/1.3 block, row 16/41 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Drive links:
16/40 | 3/8 | 0.050/1.3 | 11T | 60
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.050/1.3 block, row 16/40 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Drive links:
16/41 | 3/8 | 0.050/1.3 | 11T | 60
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.050/1.3 block, row 16/41 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Husqvarna part number:
16" / 60DL | Gauge | .050" | Bar length (inch) | 16 in | Drive links | 60 | SKU: 585 55 00-60
— Husqvarna, X-CUT C83, 3/8" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 585 55 00-60; this page's "Fits To Model" list does not name the saw, but the 2025 operator's manual table lists this chain type for the saw - Oregon part number:
PowerCut™ Saw Chain, 16" | Part# 72EXL060G
— Oregon Tool, Inc., Oregon 72EXL060G product page (specifications and Fit Guide), Product heading and Part#; Product Details: "Pitch: 3/8", gauge: .050", drive link count: 60"; the page's Fit Guide lists Husqvarna "455 RANCHER" (the list is per chain family, not per loop length)
16-inch bar — .058" (1.5 mm) bar
3/8" pitch, .058" gauge, 60 drive links One source
| Chain | Part number | Why it is listed |
|---|---|---|
| Husqvarna X-Cut C85 | 581 62 69-60[12] One source | The saw maker’s own chain |
| Oregon PowerCut 73EXL | 73EXL060G[13] One source | Oregon lists it for this saw |
Show the evidence for this row
- Pitch:
16/40 | 3/8 | 0.058/1.5 | 11T | 60
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.058/1.5 block, row 16/40 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Pitch:
16/41 | 3/8 | 0.058/1.5 | 11T | 60
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.058/1.5 block, row 16/41 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
16/40 | 3/8 | 0.058/1.5 | 11T | 60
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.058/1.5 block, row 16/40 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
16/41 | 3/8 | 0.058/1.5 | 11T | 60
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.058/1.5 block, row 16/41 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Drive links:
16/40 | 3/8 | 0.058/1.5 | 11T | 60
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.058/1.5 block, row 16/40 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Drive links:
16/41 | 3/8 | 0.058/1.5 | 11T | 60
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.058/1.5 block, row 16/41 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Husqvarna part number:
16" / 60DL | Gauge | .058" | Bar length (inch) | 16 in | Bar length | 40 cm | Drive links | 60 | SKU: 581 62 69-60
— Husqvarna, X-CUT C85, 3/8" pitch, .058 gauge: chain product page (US), Product Options, variant row for SKU 581 62 69-60; this page's "Fits To Model" list does not name the saw, but the 2025 operator's manual table lists this chain type for the saw - Oregon part number:
PowerCut™ Saw Chain, 16" | Part# 73EXL060G
— Oregon Tool, Inc., Oregon 73EXL060G product page (specifications and Fit Guide), Product heading and Part#; Product Details: "Pitch: 3/8", gauge: .058", drive link count: 60"; the page's Fit Guide lists Husqvarna "455 RANCHER" (the list is per chain family, not per loop length)
18-inch bar — .050" (1.3 mm) bar
3/8" pitch, .050" gauge, 68 drive links One source
| Chain | Part number | Why it is listed |
|---|---|---|
| Husqvarna X-Cut S83G (semi-chisel) | 585 63 90-68[5] One source | The saw maker’s own chain |
| Husqvarna X-Cut S83G (retail pack) (semi-chisel) | 529 47 50-68[5] One source | The saw maker’s own chain |
| Husqvarna X-Cut C83 | 585 55 00-68[3] One source | The saw maker’s own chain |
| Oregon PowerCut 72EXL | 72EXL068G[7] One source | Oregon lists it for this saw |
Show the evidence for this row
- Pitch:
18/45 | 3/8 | 0.050/1.3 | 11T | 68
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.050/1.3 block, row 18/45 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Pitch:
18/46 | 3/8 | 0.050/1.3 | 11T | 68
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.050/1.3 block, row 18/46 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
18/45 | 3/8 | 0.050/1.3 | 11T | 68
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.050/1.3 block, row 18/45 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
18/46 | 3/8 | 0.050/1.3 | 11T | 68
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.050/1.3 block, row 18/46 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
SAW CHAIN S83G Semi chisel 3/8" 1.3 mm, US/CA | Gauge | .050" | Bar length (inch) | 18 in | Drive links | 68 | SKU: 585 63 90-68
— Husqvarna, X-CUT S83G, 3/8" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 585 63 90-68; the page's "Fits To Model" list includes 455 Rancher - Gauge:
18" / 68DL / .050 gauge | Bar length (inch) | 18 in | Bar length | 45 cm | Gauge | .050" | SKU: 599 99 98-68
— Husqvarna, RANCHER (X-FORCE) Laminate, 3/8" pitch (XFR): bar product page (US), Product Options, variant row for SKU 599 99 98-68; the page's "Fits To Model" list includes 455 Rancher - Drive links:
18/45 | 3/8 | 0.050/1.3 | 11T | 68
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.050/1.3 block, row 18/45 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Drive links:
18/46 | 3/8 | 0.050/1.3 | 11T | 68
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.050/1.3 block, row 18/46 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Drive links:
SAW CHAIN S83G Semi chisel 3/8" 1.3 mm, US/CA | Gauge | .050" | Bar length (inch) | 18 in | Drive links | 68 | SKU: 585 63 90-68
— Husqvarna, X-CUT S83G, 3/8" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 585 63 90-68; the page's "Fits To Model" list includes 455 Rancher - Drive links:
18" / 68DL / .050 gauge | Bar length (inch) | 18 in | Bar length | 45 cm | Gauge | .050" | SKU: 599 99 98-68
— Husqvarna, RANCHER (X-FORCE) Laminate, 3/8" pitch (XFR): bar product page (US), Product Options, variant row for SKU 599 99 98-68; the page's "Fits To Model" list includes 455 Rancher - Husqvarna part number:
SAW CHAIN S83G Semi chisel 3/8" 1.3 mm, US/CA | Gauge | .050" | Bar length (inch) | 18 in | Drive links | 68 | SKU: 585 63 90-68
— Husqvarna, X-CUT S83G, 3/8" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 585 63 90-68; the page's "Fits To Model" list includes 455 Rancher - Husqvarna part number:
68DL, US/CA Retail | Gauge | .050" | Bar length (inch) | 18 in | Bar length | 45 cm | Drive links | 68 | SKU: 529 47 50-68
— Husqvarna, X-CUT S83G, 3/8" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 529 47 50-68; the page's "Fits To Model" list includes 455 Rancher - Husqvarna part number:
18" / 68DL | Gauge | .050" | Bar length (inch) | 18 in | Drive links | 68 | SKU: 585 55 00-68
— Husqvarna, X-CUT C83, 3/8" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 585 55 00-68; this page's "Fits To Model" list does not name the saw, but the 2025 operator's manual table lists this chain type for the saw - Oregon part number:
PowerCut™ Saw Chain, 18" | Part# 72EXL068G
— Oregon Tool, Inc., Oregon 72EXL068G product page (specifications and Fit Guide), Product heading and Part#; Product Details: "Pitch: 3/8", gauge: .050", drive link count: 68"; the page's Fit Guide lists Husqvarna "455 RANCHER" (the list is per chain family, not per loop length)
18-inch bar — .058" (1.5 mm) bar
3/8" pitch, .058" gauge, 68 drive links One source
| Chain | Part number | Why it is listed |
|---|---|---|
| Husqvarna H81 | 591 15 39-68[14] One source | The saw maker’s own chain |
| Husqvarna X-Cut C85 | 581 62 69-68[12] One source | The saw maker’s own chain |
| Husqvarna H42 | 591 14 34-68[15] One source | The saw maker’s own chain |
| Oregon PowerCut 73EXL | 73EXL068G[16] One source | Oregon lists it for this saw |
Show the evidence for this row
- Pitch:
18/45 | 3/8 | 0.058/1.5 | 11T | 68
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.058/1.5 block, row 18/45 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Pitch:
18/46 | 3/8 | 0.058/1.5 | 11T | 68
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.058/1.5 block, row 18/46 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
18/45 | 3/8 | 0.058/1.5 | 11T | 68
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.058/1.5 block, row 18/45 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
18/46 | 3/8 | 0.058/1.5 | 11T | 68
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.058/1.5 block, row 18/46 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
68DL / 18", US/CA | Gauge | .058" | Bar length (inch) | 18 in | Bar length | 45 cm | Drive links | 68 | SKU: 591 15 39-68
— Husqvarna, H81, 3/8" pitch, .058 gauge: chain product page (US), Product Options, variant row for SKU 591 15 39-68; the page's "Fits To Model" list includes 455 Rancher - Gauge:
18" / 68DL / .058 gauge | Bar length (inch) | 18 in | Bar length | 45 cm | Gauge | .058" | SKU: 599 99 99-68
— Husqvarna, RANCHER (X-FORCE) Laminate, 3/8" pitch (XFR): bar product page (US), Product Options, variant row for SKU 599 99 99-68; the page's "Fits To Model" list includes 455 Rancher - Drive links:
18/45 | 3/8 | 0.058/1.5 | 11T | 68
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.058/1.5 block, row 18/45 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Drive links:
18/46 | 3/8 | 0.058/1.5 | 11T | 68
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.058/1.5 block, row 18/46 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Drive links:
68DL / 18", US/CA | Gauge | .058" | Bar length (inch) | 18 in | Bar length | 45 cm | Drive links | 68 | SKU: 591 15 39-68
— Husqvarna, H81, 3/8" pitch, .058 gauge: chain product page (US), Product Options, variant row for SKU 591 15 39-68; the page's "Fits To Model" list includes 455 Rancher - Drive links:
18" / 68DL / .058 gauge | Bar length (inch) | 18 in | Bar length | 45 cm | Gauge | .058" | SKU: 599 99 99-68
— Husqvarna, RANCHER (X-FORCE) Laminate, 3/8" pitch (XFR): bar product page (US), Product Options, variant row for SKU 599 99 99-68; the page's "Fits To Model" list includes 455 Rancher - Husqvarna part number:
68DL / 18", US/CA | Gauge | .058" | Bar length (inch) | 18 in | Bar length | 45 cm | Drive links | 68 | SKU: 591 15 39-68
— Husqvarna, H81, 3/8" pitch, .058 gauge: chain product page (US), Product Options, variant row for SKU 591 15 39-68; the page's "Fits To Model" list includes 455 Rancher - Husqvarna part number:
18" / 68DL | Gauge | .058" | Bar length (inch) | 18 in | Bar length | 45 cm | Drive links | 68 | SKU: 581 62 69-68
— Husqvarna, X-CUT C85, 3/8" pitch, .058 gauge: chain product page (US), Product Options, variant row for SKU 581 62 69-68; this page's "Fits To Model" list does not name the saw, but the 2025 operator's manual table lists this chain type for the saw - Husqvarna part number:
68DL / 18", US/CA | Gauge | .058" | Bar length (inch) | 18 in | Bar length | 45 cm | Drive links | 68 | SKU: 591 14 34-68
— Husqvarna, H42, 3/8" pitch, .058 gauge: chain product page (US), Product Options, variant row for SKU 591 14 34-68; the page has no "Fits To Model" list, but the 2025 operator's manual table lists this chain type for the saw - Oregon part number:
Oregon 73EXL PowerCut Saw Chain for 18 in. Bar - 68 Drive Links | Part# 73EXL068G
— Oregon Tool, Inc., Oregon 73EXL068G product page (specifications and Fit Guide), Product heading and Part#; Product Details: "Pitch: 3/8", gauge: .058", drive link count: 68"; the page's Fit Guide lists Husqvarna "455 RANCHER" (the list is per chain family, not per loop length)
20-inch bar — .050" (1.3 mm) bar
3/8" pitch, .050" gauge, 72 drive links Verified
| Chain | Part number | Why it is listed |
|---|---|---|
| Husqvarna X-Cut S83G (semi-chisel) | 585 63 90-72[5] One source | The saw maker’s own chain |
| Husqvarna X-Cut S83G (retail pack) (semi-chisel) | 529 47 50-72[5] One source | The saw maker’s own chain |
| Husqvarna X-Cut C83 | 585 55 00-72[3] One source | The saw maker’s own chain |
| Oregon PowerCut 72EXL | 72EXL072G[10] One source | Oregon lists it for this saw |
Show the evidence for this row
- Pitch:
20/50 | 3/8 | 0.050/1.3 | 11T | 72
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.050/1.3 block, row 20/50 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Pitch:
20/50 | 3/8 | 0.050/1.3 | 11T | 72
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.050/1.3 block, row 20/50 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Pitch:
Pitch | 3/8" | Recommended bar length, max | 24 in | Chain type | S83G | Bar length (inch) | 20 in
— Husqvarna, Husqvarna 455 Rancher product page (US), Specifications > Equipment, article 970 61 32-60 - Gauge:
20/50 | 3/8 | 0.050/1.3 | 11T | 72
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.050/1.3 block, row 20/50 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
20/50 | 3/8 | 0.050/1.3 | 11T | 72
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.050/1.3 block, row 20/50 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
SAW CHAIN S83G Semi chisel 3/8" 1.3 mm, US/CA | Gauge | .050" | Bar length (inch) | 20 in | Drive links | 72 | SKU: 585 63 90-72
— Husqvarna, X-CUT S83G, 3/8" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 585 63 90-72; the page's "Fits To Model" list includes 455 Rancher - Gauge:
20" / 72DL / .050 gauge | Bar length (inch) | 20 in | Bar length | 50 cm | Gauge | .050" | SKU: 599 99 98-72
— Husqvarna, RANCHER (X-FORCE) Laminate, 3/8" pitch (XFR): bar product page (US), Product Options, variant row for SKU 599 99 98-72; the page's "Fits To Model" list includes 455 Rancher - Drive links:
20/50 | 3/8 | 0.050/1.3 | 11T | 72
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.050/1.3 block, row 20/50 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Drive links:
20/50 | 3/8 | 0.050/1.3 | 11T | 72
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.050/1.3 block, row 20/50 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Drive links:
SAW CHAIN S83G Semi chisel 3/8" 1.3 mm, US/CA | Gauge | .050" | Bar length (inch) | 20 in | Drive links | 72 | SKU: 585 63 90-72
— Husqvarna, X-CUT S83G, 3/8" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 585 63 90-72; the page's "Fits To Model" list includes 455 Rancher - Drive links:
20" / 72DL / .050 gauge | Bar length (inch) | 20 in | Bar length | 50 cm | Gauge | .050" | SKU: 599 99 98-72
— Husqvarna, RANCHER (X-FORCE) Laminate, 3/8" pitch (XFR): bar product page (US), Product Options, variant row for SKU 599 99 98-72; the page's "Fits To Model" list includes 455 Rancher - Husqvarna part number:
SAW CHAIN S83G Semi chisel 3/8" 1.3 mm, US/CA | Gauge | .050" | Bar length (inch) | 20 in | Drive links | 72 | SKU: 585 63 90-72
— Husqvarna, X-CUT S83G, 3/8" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 585 63 90-72; the page's "Fits To Model" list includes 455 Rancher - Husqvarna part number:
72DL, US/CA Retail | Gauge | .050" | Bar length (inch) | 20 in | Bar length | 50 cm | Drive links | 72 | SKU: 529 47 50-72
— Husqvarna, X-CUT S83G, 3/8" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 529 47 50-72; the page's "Fits To Model" list includes 455 Rancher - Husqvarna part number:
20" / 72DL | Gauge | .050" | Bar length (inch) | 20 in | Bar length | 50 cm | Drive links | 72 | SKU: 585 55 00-72
— Husqvarna, X-CUT C83, 3/8" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 585 55 00-72; this page's "Fits To Model" list does not name the saw, but the 2025 operator's manual table lists this chain type for the saw - Oregon part number:
PowerCut™ Saw Chain, 20" | Part# 72EXL072G
— Oregon Tool, Inc., Oregon 72EXL072G product page (specifications and Fit Guide), Product heading and Part#; Product Details: "Pitch: 3/8", gauge: .050", drive link count: 72"; the page's Fit Guide lists Husqvarna "455 RANCHER" (the list is per chain family, not per loop length)
20-inch bar — .058" (1.5 mm) bar
3/8" pitch, .058" gauge, 72 drive links One source
| Chain | Part number | Why it is listed |
|---|---|---|
| Husqvarna H81 | 591 15 39-72[14] One source | The saw maker’s own chain |
| Husqvarna X-Cut C85 | 581 62 69-72[12] One source | The saw maker’s own chain |
| Oregon PowerCut 73EXL | 73EXL072G[17] One source | Oregon lists it for this saw |
Show the evidence for this row
- Pitch:
20/50 | 3/8 | 0.058/1.5 | 11T | 72
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.058/1.5 block, row 20/50 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Pitch:
20/50 | 3/8 | 0.058/1.5 | 11T | 72
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.058/1.5 block, row 20/50 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
20/50 | 3/8 | 0.058/1.5 | 11T | 72
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.058/1.5 block, row 20/50 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
20/50 | 3/8 | 0.058/1.5 | 11T | 72
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.058/1.5 block, row 20/50 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
72DL / 20", US/CA | Gauge | .058" | Bar length (inch) | 20 in | Bar length | 50 cm | Drive links | 72 | SKU: 591 15 39-72
— Husqvarna, H81, 3/8" pitch, .058 gauge: chain product page (US), Product Options, variant row for SKU 591 15 39-72; the page's "Fits To Model" list includes 455 Rancher - Gauge:
20" / 72DL / .058 gauge | Bar length (inch) | 20 in | Bar length | 50 cm | Gauge | .058" | SKU: 599 99 99-72
— Husqvarna, RANCHER (X-FORCE) Laminate, 3/8" pitch (XFR): bar product page (US), Product Options, variant row for SKU 599 99 99-72; the page's "Fits To Model" list includes 455 Rancher - Drive links:
20/50 | 3/8 | 0.058/1.5 | 11T | 72
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.058/1.5 block, row 20/50 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Drive links:
20/50 | 3/8 | 0.058/1.5 | 11T | 72
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.058/1.5 block, row 20/50 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Drive links:
72DL / 20", US/CA | Gauge | .058" | Bar length (inch) | 20 in | Bar length | 50 cm | Drive links | 72 | SKU: 591 15 39-72
— Husqvarna, H81, 3/8" pitch, .058 gauge: chain product page (US), Product Options, variant row for SKU 591 15 39-72; the page's "Fits To Model" list includes 455 Rancher - Drive links:
20" / 72DL / .058 gauge | Bar length (inch) | 20 in | Bar length | 50 cm | Gauge | .058" | SKU: 599 99 99-72
— Husqvarna, RANCHER (X-FORCE) Laminate, 3/8" pitch (XFR): bar product page (US), Product Options, variant row for SKU 599 99 99-72; the page's "Fits To Model" list includes 455 Rancher - Husqvarna part number:
72DL / 20", US/CA | Gauge | .058" | Bar length (inch) | 20 in | Bar length | 50 cm | Drive links | 72 | SKU: 591 15 39-72
— Husqvarna, H81, 3/8" pitch, .058 gauge: chain product page (US), Product Options, variant row for SKU 591 15 39-72; the page's "Fits To Model" list includes 455 Rancher - Husqvarna part number:
20" / 72DL | Gauge | .058" | Bar length (inch) | 20 in | Bar length | 50 cm | Drive links | 72 | SKU: 581 62 69-72
— Husqvarna, X-CUT C85, 3/8" pitch, .058 gauge: chain product page (US), Product Options, variant row for SKU 581 62 69-72; this page's "Fits To Model" list does not name the saw, but the 2025 operator's manual table lists this chain type for the saw - Oregon part number:
PowerCut™ Saw Chain, 20" | Part# 73EXL072G
— Oregon Tool, Inc., Oregon 73EXL072G product page (specifications and Fit Guide), Product heading and Part#; Product Details: "Pitch: 3/8", gauge: .058", drive link count: 72"; the page's Fit Guide lists Husqvarna "455 RANCHER" (the list is per chain family, not per loop length)
24-inch bar — .050" (1.3 mm) bar
3/8" pitch, .050" gauge, 84 drive links One source
| Chain | Part number | Why it is listed |
|---|---|---|
| Husqvarna X-Cut S83G (semi-chisel) | 585 63 90-84[5] One source | The saw maker’s own chain |
| Husqvarna X-Cut S83G (retail pack) (semi-chisel) | 529 47 50-84[5] One source | The saw maker’s own chain |
| Husqvarna X-Cut C83 | 585 55 00-84[3] One source | The saw maker’s own chain |
| Oregon PowerCut 72EXL | 72EXL084G[11] One source | Oregon lists it for this saw |
Other saws that take a chain with 3/8" pitch, .050" gauge, 84 drive links
Show the evidence for this row
- Pitch:
24/60 | 3/8 | 0.050/1.3 | 11T | 84
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.050/1.3 block, row 24/60 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Pitch:
24/61 | 3/8 | 0.050/1.3 | 11T | 84
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.050/1.3 block, row 24/61 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
24/60 | 3/8 | 0.050/1.3 | 11T | 84
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.050/1.3 block, row 24/60 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
24/61 | 3/8 | 0.050/1.3 | 11T | 84
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.050/1.3 block, row 24/61 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
SAW CHAIN S83G Semi chisel 3/8" 1.3 mm, US/CA | Gauge | .050" | Bar length (inch) | 24 in | Drive links | 84 | SKU: 585 63 90-84
— Husqvarna, X-CUT S83G, 3/8" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 585 63 90-84; the page's "Fits To Model" list includes 455 Rancher - Gauge:
24" / 84DL / .050 gauge | Bar length (inch) | 24 in | Bar length | 60 cm | Gauge | .050" | SKU: 599 80 70-84
— Husqvarna, RANCHER (X-FORCE) Laminate, 3/8" pitch (XFR): bar product page (US), Product Options, variant row for SKU 599 80 70-84; the page's "Fits To Model" list includes 455 Rancher - Drive links:
24/60 | 3/8 | 0.050/1.3 | 11T | 84
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.050/1.3 block, row 24/60 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Drive links:
24/61 | 3/8 | 0.050/1.3 | 11T | 84
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.050/1.3 block, row 24/61 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Drive links:
SAW CHAIN S83G Semi chisel 3/8" 1.3 mm, US/CA | Gauge | .050" | Bar length (inch) | 24 in | Drive links | 84 | SKU: 585 63 90-84
— Husqvarna, X-CUT S83G, 3/8" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 585 63 90-84; the page's "Fits To Model" list includes 455 Rancher - Drive links:
24" / 84DL / .050 gauge | Bar length (inch) | 24 in | Bar length | 60 cm | Gauge | .050" | SKU: 599 80 70-84
— Husqvarna, RANCHER (X-FORCE) Laminate, 3/8" pitch (XFR): bar product page (US), Product Options, variant row for SKU 599 80 70-84; the page's "Fits To Model" list includes 455 Rancher - Husqvarna part number:
SAW CHAIN S83G Semi chisel 3/8" 1.3 mm, US/CA | Gauge | .050" | Bar length (inch) | 24 in | Drive links | 84 | SKU: 585 63 90-84
— Husqvarna, X-CUT S83G, 3/8" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 585 63 90-84; the page's "Fits To Model" list includes 455 Rancher - Husqvarna part number:
84DL, US/CA Retail | Gauge | .050" | Bar length (inch) | 24 in | Bar length | 60 cm | Drive links | 84 | SKU: 529 47 50-84
— Husqvarna, X-CUT S83G, 3/8" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 529 47 50-84; the page's "Fits To Model" list includes 455 Rancher - Husqvarna part number:
24" / 84DL | Gauge | .050" | Bar length (inch) | 24 in | Bar length | 60 cm | Drive links | 84 | SKU: 585 55 00-84
— Husqvarna, X-CUT C83, 3/8" pitch, .050 gauge: chain product page (US), Product Options, variant row for SKU 585 55 00-84; this page's "Fits To Model" list does not name the saw, but the 2025 operator's manual table lists this chain type for the saw - Oregon part number:
PowerCut™ Saw Chain, 24" | Part# 72EXL084G
— Oregon Tool, Inc., Oregon 72EXL084G product page (specifications and Fit Guide), Product heading and Part#; Product Details: "Pitch: 3/8", gauge: .050", drive link count: 84"; the page's Fit Guide lists Husqvarna "455 RANCHER" (the list is per chain family, not per loop length)
24-inch bar — .058" (1.5 mm) bar
3/8" pitch, .058" gauge, 84 drive links One source
| Chain | Part number | Why it is listed |
|---|---|---|
| Husqvarna X-Cut C85 | 581 62 69-84[12] One source | The saw maker’s own chain |
| Oregon PowerCut 73EXL | 73EXL084G[18] One source | Oregon lists it for this saw |
Show the evidence for this row
- Pitch:
24/60 | 3/8 | 0.058/1.5 | 11T | 84
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.058/1.5 block, row 24/60 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Pitch:
24/61 | 3/8 | 0.058/1.5 | 11T | 84
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.058/1.5 block, row 24/61 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
24/60 | 3/8 | 0.058/1.5 | 11T | 84
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.058/1.5 block, row 24/60 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Gauge:
24/61 | 3/8 | 0.058/1.5 | 11T | 84
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.058/1.5 block, row 24/61 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Drive links:
24/60 | 3/8 | 0.058/1.5 | 11T | 84
— Husqvarna, Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025, p. 36, "Recommended cutting equipment" table, 0.058/1.5 block, row 24/60 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Drive links:
24/61 | 3/8 | 0.058/1.5 | 11T | 84
— Husqvarna, Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023, p. 37, "Recommended cutting equipment" table, 0.058/1.5 block, row 24/61 (cells joined with |: length, pitch, gauge, max. nose radius, drive links) - Husqvarna part number:
24" / 84DL | Gauge | .058" | Bar length (inch) | 24 in | Bar length | 60 cm | Drive links | 84 | SKU: 581 62 69-84
— Husqvarna, X-CUT C85, 3/8" pitch, .058 gauge: chain product page (US), Product Options, variant row for SKU 581 62 69-84; this page's "Fits To Model" list does not name the saw, but the 2025 operator's manual table lists this chain type for the saw - Oregon part number:
Oregon 73EXL PowerCut Saw Chain for 24 in. Bar - 84 Drive Links | Part# 73EXL084G
— Oregon Tool, Inc., Oregon 73EXL084G product page (specifications and Fit Guide), Product heading and Part#; Product Details: "Pitch: 3/8", gauge: .058", drive link count: 84"; the page's Fit Guide lists Husqvarna "455 RANCHER" (the list is per chain family, not per loop length)
Confirm before you order
- Read the bar. Most bars have the pitch, gauge and drive-link count stamped near the mounting end. Those numbers describe the bar actually on your saw, which may not be the one it left the factory with.
- If the stamp is worn off, count the drive links on the old chain: the teeth on the inside of the loop that ride in the bar groove.
- Match all three numbers to one row of the Husqvarna 455 Rancher table above. A chain with the right length but the wrong gauge or pitch will not fit the bar or the sprocket.
How to find pitch, gauge and drive links step by step
If your saw matches none of the rows, its bar or sprocket has probably been changed. Go by what is stamped on the bar, or ask a dealer.
Numbers you may see elsewhere
These figures appear on other pages for this saw. They are listed with the reason they are not used in the table above.
- 20-inch bar, pitch: .325 (Oregon Tool, Inc.)[9] — Oregon's fit list is per chain family and names this saw under its .325 chains; that would need a .325 drive sprocket and bar, and neither North American Husqvarna manual checked lists a .325 combination for this saw.
- 20-inch bar, gauge: .058 (Husqvarna)[8] — The same table names the supplied chain as S83G, which Husqvarna's manual and chain page give only in .050; .058 is a separate listed option for this saw (see the .058 rows), not the gauge of an S83G loop. The Canadian page shows 1.5 mm in the same field.
- 20-inch bar, drive links: 78 (Oregon Tool, Inc.)[9] — 78 links is Oregon's count for a .325 loop on a 20 inch bar; the 3/8 inch set-up Husqvarna lists for this saw takes 72.
Two gauges, one drive-link count
Both operator's manuals checked (publications dated 2023 and 2025) list every bar length twice: at .050 with chains H80, H46, H47, C83 and, in the 2025 edition, S83G; and at .058 with H81, H42, H48 and C85. The drive-link count does not change with gauge, so a 72 link loop can still be the wrong chain.
Husqvarna's Rancher X-Force bar for this saw is sold in both gauges at 18 and 20 inches, and in .050 at 24 inches.
The product page contradicts itself on gauge
Husqvarna's US page for the current 20 inch saw (article 970 61 32-60) names the supplied chain as S83G and the bundle as "X-cut 1,3 mm", yet the Gauge line of the same table reads .058 (1.5 mm on the Canadian page). Husqvarna's chain page sells S83G only in .050. This record marks the S83G set-up as the one supplied and lists .058 as a separate option. For any individual saw, the stamp on the bar settles it.
Where 78 and 80 link figures come from
Neither manual lists a .325 combination for the 455 Rancher. Oregon's product pages name the saw in the fit lists of its .325 chain families, but a .325 chain needs a .325 drive sprocket and bar: the manual states that chain pitch must align with the drive sprocket and the bar tip sprocket. Oregon's .325 loop for a 20 inch bar has 78 links, and Husqvarna's own 20 inch .325 bar for its smaller saws takes 80. Neither count fits the 3/8 inch bars listed for this saw.
Loop lengths sold in more than one count
Husqvarna's X-Cut C83 page offers 18 inch loops with 66 and 68 links and 20 inch loops with 70 and 72. The manual's counts for this saw are 68 and 72.
Chains and bars without a row here
The manuals also name H80, H46, H47 and H48. No Husqvarna page opened for this record gave loop part numbers for those, and none listed an S83G loop for 15 or 16 inch bars, so those rows carry fewer chains.
Husqvarna's documents also disagree on the shortest bar: the product page table says 13 inches, its FAQ says 18, and the manual table starts at 15.
How Oregon equivalents were matched
Oregon's product pages carry a fit list for each chain, but the list is the same for every loop length of a chain family. The drive-link counts in this record therefore come from Husqvarna's documents; Oregon's pages are used only for the Oregon part number and for whether Oregon names this saw.
Sources
- Husqvarna. Operator's manual: 455 Rancher, 460 Rancher (EN/ES/FR), publication 1580-005, 19.12.2025. Saw maker’s own document; retrieved November 18, 2026
- Husqvarna. Operator's manual: 455 Rancher, 455e Rancher, 460 Rancher (EN), publication 589-012, 26.04.2023. Saw maker’s own document; retrieved November 18, 2026
- Husqvarna. X-CUT C83, 3/8" pitch, .050 gauge: chain product page (US). Saw maker’s own document; retrieved November 18, 2026
- Oregon Tool, Inc. Oregon 72EXL060G product page (specifications and Fit Guide). Chain or bar maker’s fit data; retrieved November 18, 2026
- Husqvarna. X-CUT S83G, 3/8" pitch, .050 gauge: chain product page (US). Saw maker’s own document; retrieved November 18, 2026
- Husqvarna. RANCHER (X-FORCE) Laminate, 3/8" pitch (XFR): bar product page (US). Saw maker’s own document; retrieved November 18, 2026
- Oregon Tool, Inc. Oregon 72EXL068G product page (specifications and Fit Guide). Chain or bar maker’s fit data; retrieved November 18, 2026
- Husqvarna. Husqvarna 455 Rancher product page (US). Saw maker’s own document; retrieved November 18, 2026
- Oregon Tool, Inc. Oregon 20LPX078G product page (specifications and Fit Guide). Chain or bar maker’s fit data; retrieved November 18, 2026
- Oregon Tool, Inc. Oregon 72EXL072G product page (specifications and Fit Guide). Chain or bar maker’s fit data; retrieved November 18, 2026
- Oregon Tool, Inc. Oregon 72EXL084G product page (specifications and Fit Guide). Chain or bar maker’s fit data; retrieved November 18, 2026
- Husqvarna. X-CUT C85, 3/8" pitch, .058 gauge: chain product page (US). Saw maker’s own document; retrieved November 18, 2026
- Oregon Tool, Inc. Oregon 73EXL060G product page (specifications and Fit Guide). Chain or bar maker’s fit data; retrieved November 18, 2026
- Husqvarna. H81, 3/8" pitch, .058 gauge: chain product page (US). Saw maker’s own document; retrieved November 18, 2026
- Husqvarna. H42, 3/8" pitch, .058 gauge: chain product page (US). Saw maker’s own document; retrieved November 18, 2026
- Oregon Tool, Inc. Oregon 73EXL068G product page (specifications and Fit Guide). Chain or bar maker’s fit data; retrieved November 18, 2026
- Oregon Tool, Inc. Oregon 73EXL072G product page (specifications and Fit Guide). Chain or bar maker’s fit data; retrieved November 18, 2026
- Oregon Tool, Inc. Oregon 73EXL084G product page (specifications and Fit Guide). Chain or bar maker’s fit data; retrieved November 18, 2026
Seen a number here that does not match your saw or its manual? Report it.