How to read chain numbers from Oregon, Stihl and Husqvarna

Last updated November 18, 2026

Oregon, Stihl and Husqvarna each name their chains with a short code, and each code is built differently. The tables below take every meaning from that maker’s own documents. Where the documents leave part of a code unexplained, this page says so instead of guessing.

Where a saw chain is stamped Side view of a saw chain with two stamp positions marked: on the cutter beside the depth gauge, where Stihl puts a pitch code digit, and on the drive link, where Oregon puts its chain number and Stihl puts a gauge digit. 3 6 6 Stamp on the cutter, by the depth gauge Stihl: pitch code digit Stamp on the drive link Oregon: chain number (pitch and gauge) Stihl: last digit of the gauge in mm
Part of the code is stamped on the chain itself. The stamps differ by maker.

Oregon

Oregon’s manual says nearly all of its saw chains are named by a number followed by one, two or three letters, such as 72LPX or 91PX. The number is stamped on the drive links. A full part number adds the drive-link count: Oregon’s examples are 72LGX-068G and 20BPX066.

PartIn 72LGX068GMeaning
Number72The physical size of the chain: one pitch and one gauge (next table)
LettersLGXThe chain type. Oregon’s identification chart lists the cutter shape, cutter sequence and kickback-reducing features for each type by its whole name. The edition read for this page gives no letter-by-letter key.
Digits after the letters068Drive-link count
M in frontas in M91VXLThe DuraCut (formerly MultiCut) version of a chain type, which Oregon describes as a more durable version of the same chain
Last letterGNot explained in the Oregon documents read for this page
Oregon numberPitchGauge
251/4″.050″ (1.3 mm)
80.325″ Low Profile.043″ (1.1 mm)
903/8″ Low Profile.043″ (1.1 mm)
913/8″ Low Profile.050″ (1.3 mm)
95.325″, narrow kerf.050″ (1.3 mm)
20, 21, 22.325″.050″, .058″, .063″
72, 73, 753/8″.050″, .058″, .063″
26, 58.404″.058″ (1.5 mm)
27, 59, 68.404″.063″ (1.6 mm)

Two examples from the manual show how the letters work in practice: 72DPX and 72APX are the same semi-chisel chain in standard and skip sequence, and 91PX is a low-kickback chain that Oregon calls Chamfer Chisel.

Stihl

Stihl calls its code a marketing number and prints it in addition to the part number. A US listing shows the pattern: “RAPID™ Micro™ 3 | .325″ | .063″ | 62 drive links (26 RM3 62)”.

Stihl’s sharpening brochure gives the two digits as stamps on the chain: a pitch digit on each cutter beside the depth gauge, and a gauge digit on every drive link. The chain lists in Stihl’s instruction manuals show the same two digits at the front of the marketing number. They list 23 RM as .325″ pitch with a 1.3 mm gauge, 26 RM3 as .325″ and 1.6 mm, 63 PM3 as 3/8″ P and 1.3 mm, and 61 PMM3 as 3/8″ P and 1.1 mm.

PartIn 26 RM3 62Meaning
First digit2Pitch: 1 = 1/4″, 2 = .325″, 3 = 3/8″, 4 = .404″, 6 = 3/8″ Picco (3/8″ P), 7 = 1/4″ Picco (1/4″ P)
Second digit6Drive link gauge: 1 = 1.1 mm, 3 = 1.3 mm, 5 = 1.5 mm, 6 = 1.6 mm
First letterRR = Rapid, a standard-height cutter. P = Picco, a low-profile cutter.
Second letterMM = Micro, semi-chisel. S = Super, full chisel. D = Duro, carbide-tipped.
3 after the letters3Low-kickback chain with a humped drive link
X in the lettersnot presentRipping chain, as in 36 RMX
Number at the end62Drive-link count

Stihl’s listings also use F for full skip (RMF), a second M for Mini (PMM3) and H for Hexa (RH). The pitch stamp on the cutter is not always the single digit: Stihl’s manual lists “1/4”, “325”, “3/8”, “404”, and “P” or “PM” as alternative markings. Stihl’s brochure adds that a letter C stamped on each cutter identifies a comfort chain, a design that reduces vibration.

Husqvarna

Husqvarna publishes a key for its X-CUT and X-Precision chains, using SP33G as the example.

PartIn SP33GMeaning
First letterSCutter profile: C = Chisel, with square corners. S = Semi-Chisel, with rounded corners.
P, if presentPPixel: a thinner, lighter chain that makes a narrow cut and is only to be used on a Pixel bar. No letter means a standard chain.
First digit3Pitch: 1 = 1/4″ mini, 2 = .325″ mini, 3 = .325″, 8 = 3/8″, 9 = 3/8″ mini
Second digit3Gauge: 1 = 1.1 mm (.043″), 3 = 1.3 mm (.050″), 5 = 1.5 mm (.058″)
Last letterGGuarded drive link, a kickback-reducing feature

Read this way, S93G is a semi-chisel 3/8″ mini chain in .050″ gauge with guarded drive links, and C85 is a chisel 3/8″ chain in .058″ gauge. The published key lists no digit for .404″ pitch or for .063″ gauge.

Husqvarna’s H-series names, such as H30, H25 and H37, do not follow this key. A Husqvarna operator’s manual lists H30 beside SP33G as a .325″ pitch, .050″ gauge chain, and H25 as .325″ and .058″. No Husqvarna document read for this page explains the digits in an H name, so look an H chain up by its whole name.

What Oregon lists as replacements

Oregon’s product pages carry a “Replacement Guide” section that lists Husqvarna and Stihl chain names beside each Oregon chain. The rows below are taken from those lists. They are Oregon’s statements for one loop length each, not Stihl’s or Husqvarna’s, and a chain named here still has to match your bar’s drive-link count. Oregon writes each Stihl name as one string with the drive-link count, for example 23RM366E.

SizeOregonHusqvarna names listedStihl name listed
3/8″ Low Profile, .043″90PXH3861 PMM3
3/8″ Low Profile, .050″91PXH35, H37, S93G63 PM3
.325″, .050″20BPXH2223 RM3
.325″, .050″, narrow kerf95TXLH30, SP33Gnone listed
.325″, .063″22BPXH28none listed
3/8″, .050″72EXLC83, H4733 RS
3/8″, .058″73EXLC85, H4835 RS

The table also shows that the three makers name one pitch three ways. Oregon’s lists pair Stihl’s 3/8″ P chains and Husqvarna’s 3/8″ mini chains with its own 3/8″ Low Profile chains. A replacement of the same size is not always the same kind of chain: Oregon describes 20BPX as Micro Chisel, while Stihl describes the 23 RM3 listed beside it as semi-chisel. Cutter shapes are compared in chain types and file sizes.

Codes on the bar

Where a guide bar is stamped The tail of a guide bar, the end that bolts to the saw, with its mounting slot and holes. A dashed box on the side of the tail marks where makers stamp or etch the bar's data. stamped or etched data tail: the end that bolts to the saw toward the nose
Makers stamp or etch bar data on the tail. Stihl etches five items in a fixed order.

The bar tail carries its own data, which is the quickest check on a chain code. Stihl etches the part number, cutting length, groove width, drive-link count and pitch. Oregon etches a part number that encodes length, gauge, nose and mount. How to find your chain size covers reading the bar, and the guide to bar mounts decodes Oregon’s bar numbers. For the chains documented for one saw, go to its page, for example Stihl MS 271 or Husqvarna 455 Rancher.

Sources